Re: CWLMS device discovery

If your discovery is not working, first try adding any 'central' device
(like core switch) manually. Then configure that device as a 'seed' in your
discovery settings. In fact its better you select 'use DCR as seed' option.

Also as Tyson suggested, try to enable all the relevant discovery methods
(ARP,CDP,HSRP,Routing Table, Ping Sweep)

Regards

Farrukh

On Thu, Feb 4, 2010 at 5:14 PM, abderrahim sadki <a_sadki1_at_hotmail.com>wrote:

> Hi all,
>
> I have a problem with CWLMS as it doesnt discover any device, I double
> check
> the config on CWLMS and it seems fine...
> here is my config on one of the device:
>
>
> snmp-server community public RO CWLMS_SNMP
> snmp-server community private RW CWLMS_SNMP
> snmp-server trap-source Vlan1
> snmp-server enable traps snmp authentication
>
>
> snmp-server enable traps syslog
> snmp-server enable traps vlan-membership
> snmp-server host 192.168.1.211 public
> snmp-server host 192.168.1.212 public
>
> Any idea on where to start troubleshooting?
> device and CWLMS can communicate ping is fine..
>
> thanks in advance
> Abderrahim
>
> _________________________________________________________________
> Hotmail: Free, trusted and rich email service.
> https://signup.live.com/signup.aspx?id=60969
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Feb 06 2010 - 11:24:57 ART