Re: ISIS level-2 into level-1 redistribution + filtering

you'll have to match IP prefixes using an ACL/prefix-list or match
ISIS route tags to do this filtering.
so u need to either use "match ip addr" or "match tag" in the
route-map. CLNS matching wont work.

isis tags can be set on R1 under the R1's interface using "isis tag
<tag-value>" and used on R3 to filter out the tagged routes using a
route-map.
att-bit is not used for filtering isis ia routes.

Swap
#19804

On Sat, Jan 30, 2010 at 11:04 PM, JR Garcia <ttuner_at_gmail.com> wrote:
>
> try adding "set-attached-bit route-map CLNS" under your ISIS config.
> i think that will fix your issue.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Jan 30 2010 - 23:29:37 ART