Re: MDT not forming tunnel

I think I have ran into this issue before with some some 7200 codes. What
IOS are you using? What is your full topology? Is this dynamips?
Occasionally, I would add "bgp next-hop loopback X" under the VRF and it
would work...never fully figured out why.

On Fri, Jan 22, 2010 at 6:34 PM, Tyson Scott <tscott_at_ipexpert.com> wrote:

> Do both routers have pim enabled on the loopbacks
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Technical Instructor - IPexpert, Inc.
> Mailto: tscott_at_ipexpert.com
> Telephone: +1.810.326.1444, ext. 208
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of JR
> Garcia
> Sent: Friday, January 22, 2010 7:53 PM
> To: Marko Milivojevic
> Cc: Cisco certification
> Subject: Re: MDT not forming tunnel
>
> i do:
>
> PE1:
> ip vrf A
> rd 2:2
> route-target export 2:2
> route-target import 2:2
> route-target import 3:3
> mdt default 239.1.1.1
>
> PE2:
> ip vrf B
> rd 3:3
> route-target export 3:3
> route-target import 3:3
> route-target import 2:2
> mdt default 239.1.1.1
>
> tunnel interface doesnt show up on either router. ive gotten this to
> work before... not sure whats different now.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Bryan Bartik
CCIE #23707 (R&S, SP), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
Blogs and organic groups at http://www.ccie.net