RE: IPS software release 6.1X

I stand corrected. The 4215 is what we previously had and it supported 6.0
but didn't support virtualization. Last I checked this was the case with
the 4235 as well but they must have changed it. Just as the PIX was not
going to support past 8.0 but they have released software support for it up
to 8.0(4)

http://www.cisco.com/en/US/products/hw/vpndevc/ps4077/prod_release_notes_lis
t.html

Go to the release notes and you can look for the differences between
versions.

Regards,
 
Tyson Scott - CCIE #13513 R&S, Security, and SP
Technical Instructor - IPexpert, Inc.
Mailto: tscott_at_ipexpert.com
Telephone: +1.810.326.1444, ext. 208
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130

IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S,
Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service
Provider) Certification Training with locations throughout the United
States, Europe and Australia. Be sure to check out our online communities at
www.ipexpert.com/communities and our public website at www.ipexpert.com

-----Original Message-----
From: Edouard Zorrilla [mailto:ezorrilla_at_tsf.com.pe]
Sent: Saturday, January 16, 2010 7:39 PM
To: Tyson Scott; 'Ben Holko'; security_at_groupstudy.com
Cc: ccielab_at_groupstudy.com
Subject: Re: IPS software release 6.1X

Tyson,

6.0 support virtual sensors and also anomaly detection :

http://www.cisco.com/en/US/docs/security/ips/6.0/configuration/guide/cli/cli
AnEng.html

So it seems there is not alot of difference between these two that make a
worth buying a 4240 for the Lab if you have a 4235 already !. What I mean is

that, for the exam, may I use in my Rack just 6.0 and so be it ?,

Regards

----- Original Message -----
From: "Tyson Scott" <tscott_at_ipexpert.com>
To: "'Edouard Zorrilla'" <ezorrilla_at_tsf.com.pe>; "'Ben Holko'"
<ben_at_holnet.net>; <security_at_groupstudy.com>
Cc: <ccielab_at_groupstudy.com>
Sent: Saturday, January 16, 2010 12:46 PM
Subject: RE: IPS software release 6.1X

> The interface is very different from GUI standpoint. 6.1 supports
> multiple
> virtual sensors, Anomaly detection, and a few other things. Enough that
> not
> using it would make a shortcoming for you.
>
> If you do rack rental for the IPS I think that would be the best way to do
> it considering the steep price tag to buy a 4240. You can check out
> proctorlabs.com if interested in looking at our topology. We do use the
> new
> IPS in our racks.
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Technical Instructor - IPexpert, Inc.
> Mailto: tscott_at_ipexpert.com
> Telephone: +1.810.326.1444, ext. 208
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
>
>
> -----Original Message-----
> From: Edouard Zorrilla [mailto:ezorrilla_at_tsf.com.pe]
> Sent: Saturday, January 16, 2010 12:36 PM
> To: Tyson Scott; 'Ben Holko'; security_at_groupstudy.com
> Cc: ccielab_at_groupstudy.com
> Subject: Re: IPS software release 6.1X
>
> Is there a lot of changes between 6.0 and 6.1 ?. I mean, may I build up my
> lab with 6.0 even though in the lab exam I get 6.1 ?.
>
> Any thought will be appreciated,
>
> Regards
>
> ----- Original Message -----
> From: "Tyson Scott" <tscott_at_ipexpert.com>
> To: "'Ben Holko'" <ben_at_holnet.net>; "'Edouard Zorrilla'"
> <ezorrilla_at_tsf.com.pe>; <security_at_groupstudy.com>
> Cc: <ccielab_at_groupstudy.com>
> Sent: Saturday, January 16, 2010 9:08 AM
> Subject: RE: IPS software release 6.1X
>
>
>> Since the new release.
>>
>> Regards,
>>
>> Tyson Scott - CCIE #13513 R&S, Security, and SP
>> Technical Instructor - IPexpert, Inc.
>> Mailto: tscott_at_ipexpert.com
>> Telephone: +1.810.326.1444, ext. 208
>> Live Assistance, Please visit: www.ipexpert.com/chat
>> eFax: +1.810.454.0130
>>
>>
>> -----Original Message-----
>> From: Ben Holko [mailto:ben_at_holnet.net]
>> Sent: Saturday, January 16, 2010 4:07 AM
>> To: 'Tyson Scott'; 'Edouard Zorrilla'; 'security_at_groupstudy.com'
>> Cc: 'ccielab_at_groupstudy.com'
>> Subject: RE: IPS software release 6.1X
>>
>> Also 6.1 has been in the lab for some time now hasn't it?
>>
>> Ben
>>
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Tyson Scott
>> Sent: Saturday, January 16, 2010 1:21 PM
>> To: 'Edouard Zorrilla'; security_at_groupstudy.com
>> Cc: ccielab_at_groupstudy.com
>> Subject: RE: IPS software release 6.1X
>>
>> Edouard,
>>
>> To support 6.1 The lowest model is the 4240. Your platform doesn't
>> support
>> 6.1
>>
>> Regards,
>>
>> Tyson Scott - CCIE #13513 R&S, Security, and SP Technical Instructor -
>> IPexpert, Inc.
>> Mailto: tscott_at_ipexpert.com
>> Telephone: +1.810.326.1444, ext. 208
>> Live Assistance, Please visit: www.ipexpert.com/chat
>> eFax: +1.810.454.0130
>>
>>
>>
>> -----Original Message-----
>> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
>> Edouard Zorrilla
>> Sent: Friday, January 15, 2010 8:27 PM
>> To: security_at_groupstudy.com
>> Cc: ccielab_at_groupstudy.com
>> Subject: IPS software release 6.1X
>>
>> Anyone know if from cisco.com I can download the 6.1X software release
>> which
>> is about to come in the exam ?, I have found just the
>> IPS-K9-r-1.1-a-6.0-6-E3.pkg (6.0X) but not the 6.1X.
>>
>> My hardware is :
>>
>>
>> sensor# sh ver
>> Application Partition:
>> Cisco Intrusion Prevention System, Version 5.0(2)S152.0 OS Version
>> 2.4.26-IDS-smp-bigphys
>> Platform: IDS-4235
>>
>>
>> Thanks a lot,
>>
>> Regards
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Jan 16 2010 - 20:00:06 ART