RE: Voice Translation Problem

Do a "deb voi dialpeer inout".

You won't see any variant on your q931 as that is prior to incoming digit manipulation for incoming. You would see it if this were an egress call as that would be post translation.

Paul (#16842 RS/Sec)

=======================================================================

              Paul Dardinski - CCIE #16842 (RS & Security)
                     CCVP, CCNP, CCDA, MCSE, MBA
                      Cisco Wireless Specialist
                       Marshall Communications
                        20098 Ashbrook Place
                              Suite 260
                         Ashburn, VA 20147
                     (571) 223-2010 (Ext 105)
                        FAX: (571) 223-2012

=======================================================================

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of davidytk
Sent: Wednesday, January 13, 2010 9:32 AM
To: ccielab_at_groupstudy.com
Subject: Voice Translation Problem

Hi All

I tried to configured the following translation rule

Voice translation-rule 1

 Rule 1 /^911/ /9911/ type unknown subscriber

Voice translation-profile fromPSTN

 Translate calling 1

Dial-peer voice 1000 pots

 Incoming called .

 Direct-inward-dial

 Port 1/0:23

Voice-port 1/0:23

 Translation-profile incoming fromPSTN

I tried to called to IP phone from 911, when I debug isdn q931, the calling
number and the calling type does not change, it is still 911 and type
"unknown"

I tried to configure the translation-profile to "dial-peer 1000" it is still
the same.

Anyone know how to solve this.

Thanks

Best Regards

David

Blogs and organic groups at http://www.ccie.net
Received on Wed Jan 13 2010 - 09:51:35 ART