RE: Voice Translation Problem

Hi Fortner

As I want to change the calling type for some specific number "e.g." 911 so
I create the translation-pattern on HQ router (MGCP GW). But I know the
voice-translation pattern does not work on this

Should I need to configure on CUCM only.

Thanks
Best Regards
David

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Christopher D. Fortner
Sent: Wednesday, January 13, 2010 10:40 PM
To: davidytk
Cc: ccielab_at_groupstudy.com
Subject: Re: Voice Translation Problem

You won't see the change in the Q931 debug as that is before it hits
the voice translation rule.

Chris Fortner #18065
CCIE Voice Program Manager
Sr. Instructor
cfortner_at_ccbootcamp.com
816-877-6327. Mobile

On Jan 13, 2010, at 8:34 AM, "davidytk" <davidytk_at_netvigator.com> wrote:

> Hi All
>
>
>
> I tried to configured the following translation rule
>
>
>
> Voice translation-rule 1
>
> Rule 1 /^911/ /9911/ type unknown subscriber
>
> Voice translation-profile fromPSTN
>
> Translate calling 1
>
>
>
> Dial-peer voice 1000 pots
>
> Incoming called .
>
> Direct-inward-dial
>
> Port 1/0:23
>
>
>
> Voice-port 1/0:23
>
> Translation-profile incoming fromPSTN
>
>
>
> I tried to called to IP phone from 911, when I debug isdn q931, the
> calling
> number and the calling type does not change, it is still 911 and type
> "unknown"
>
>
>
> I tried to configure the translation-profile to "dial-peer 1000" it
> is still
> the same.
>
>
>
> Anyone know how to solve this.
>
>
>
> Thanks
>
> Best Regards
>
> David
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
 

> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Jan 13 2010 - 22:47:54 ART