RE: VTP issue

Thanks Dale, I didn't think I has a password on them and I know I had looked on some of the switches before, but I guess I didn't check these two. I just created a random password and it worked perfectly. Thanks again.

Rob

-----Original Message-----
From: Dale Shaw [mailto:dale.shaw_at_gmail.com]
Sent: Sunday, January 03, 2010 6:06 PM
To: Rob Phillips
Cc: ccielab_at_groupstudy.com
Subject: Re: VTP issue

Hi Rob,

On Mon, Jan 4, 2010 at 10:58 AM, Rob Phillips <rrphillips_at_swankav.com> wrote:
> I have been trying to troubleshoot an issue for a while now and I cannot
> figure out how to correct it. The issue appears that the MD5 digest is
> failing. I have simplied my network but shutting down all ports but 1
> that links the two switches together. Both are connect to Port f0/24.
> CAT-1 is a 3550 and CAT-4 is a 2960. CAT-1 has all of the VLAN's I need
> but will not show up on CAT-4. I have rebooted both switches and
> deleted the vlan.dat that was on CAT-4. I also verified that CAT-1 was
> transmitting the correct information to CAT-2 which I have since
> shutdown while I troubleshoot this issue. Any Ideas would be a great
> help. Below is some of the output from the switches

[...]

CAT-4 needs to be (manually) configured with the same VTP password
you've configured on CAT-1. It's not clear to me from your
message/outputs whether you've done this. The differing MD5 digests
suggest not.

cheers,
Dale

Blogs and organic groups at http://www.ccie.net
Received on Sun Jan 03 2010 - 18:48:36 ART