Re: AToM not working

Hi guys, I changes routers and IOS from 7206 12.0(33) S4 to 3745 12.4(15)T9
with the same configs and everything works. :(
Tx

On Wed, Nov 18, 2009 at 7:52 PM, srinivas pv <vsrinivas.paturi_at_gmail.com>wrote:

> Hi,
>
> Could you provide following outputs?
>
> show mpls l2 vc detail
> show mpls l2tr binding
> show connection
> show connection name <NAME>
>
> thanks,
> Srinivas
>
>
>
> On Wed, Nov 18, 2009 at 10:48 PM, Bryan Bartik <bbartik_at_ipexpert.com>wrote:
>
>> Ah, I see. Is the frame interface up/up between R4 and R1? If not, use no
>> keepalive or make one end the DCE. Something like this on R1
>>
>> frame-relay switching
>> interface Serial1/0
>> frame-relay intf-type dce
>>
>>
>> On Wed, Nov 18, 2009 at 9:52 AM, Service Provider <
>> service.providersa_at_gmail.com> wrote:
>>
>> > Tx Bryan for that, however my VC between the PE routers is still down,
>> that
>> > is where my major concern is.
>> >
>> > R1#sh mpls l2 vc
>> >
>> > Local intf Local circuit Dest address VC ID
>> Status
>> > ------------- -------------------------- --------------- ----------
>> > ----------
>> > Se1/0 FR DLCI 104 150.1.2.2 12
>> DOWN
>> >
>> > R2# sh mpls l2 v
>> >
>> > Local intf Local circuit Dest address VC ID
>> Status
>> > ------------- -------------------------- --------------- ----------
>> > ----------
>> > Fa2/0 Ethernet 150.1.1.1 12
>> DOWN
>> >
>> > When debugging "debug mpls l2transport packet" there's nothing coming
>> up.
>> >
>> > On Wed, Nov 18, 2009 at 5:58 PM, Service Provider <
>> > service.providersa_at_gmail.com> wrote:
>> >
>> > > Hi All
>> > >
>> > > I configured AToM between R3 and R4 but not working. Topology is.
>> > >
>> > > R4-----------(F/R)--------------R1--------------R2--------------R3
>> > > CE PE Eth PE Eth CE
>> > > !
>> > > Configs below, Please help.
>> > >
>> > > R1#sh run
>> > > Building configuration...
>> > >
>> > > Current configuration : 1724 bytes
>> > > !
>> > > version 12.0
>> > > service timestamps debug uptime
>> > > service timestamps log uptime
>> > > no service password-encryption
>> > > !
>> > > hostname R1
>> > > !
>> > > boot-start-marker
>> > > boot-end-marker
>> > > !
>> > > !
>> > > ip subnet-zero
>> > > !
>> > > !
>> > > ip cef
>> > > ip ssh time-out 120
>> > > ip ssh authentication-retries 3
>> > > !
>> > > !
>> > > pseudowire-class atom
>> > > encapsulation mpls
>> > > interworking ethernet
>> > > !
>> > > !
>> > > interface Loopback0
>> > > ip address 150.1.1.1 255.255.255.255
>> > > no ip directed-broadcast
>> > > !
>> > > interface FastEthernet0/0
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > !
>> > > interface Serial1/0
>> > > no ip address
>> > > no ip directed-broadcast
>> > > encapsulation frame-relay
>> > > serial restart-delay 0
>> > > frame-relay interface-dlci 104 switched
>> > > !
>> > > interface Serial1/1
>> > > ip address 150.1.12.1 255.255.255.0
>> > > no ip directed-broadcast
>> > > ip router isis
>> > > tag-switching mtu 1600
>> > > tag-switching ip
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/2
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/3
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/4
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/5
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/6
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/7
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > router isis
>> > > net 49.0000.0000.0001.00
>> > > passive-interface Loopback0
>> > > !
>> > > ip classless
>> > > !
>> > > !
>> > > connect atom Serial1/0 104 l2transport
>> > > xconnect 150.1.2.2 12 pw-class atom
>> > > !
>> > > !
>> > > !
>> > > tag-switching tdp router-id Loopback0 force
>> > > control-plane
>> > > !
>> > > !
>> > > line con 0
>> > > exec-timeout 0 0
>> > > stopbits 1
>> > > line aux 0
>> > > stopbits 1
>> > > line vty 0 4
>> > > login
>> > > !
>> > > no cns aaa enable
>> > > end
>> > >
>> > >
>> > >
>> > >
>> > > R2#sh run
>> > > Building configuration...
>> > >
>> > > Current configuration : 1834 bytes
>> > > !
>> > > version 12.0
>> > > service timestamps debug uptime
>> > > service timestamps log uptime
>> > > no service password-encryption
>> > > !
>> > > hostname R2
>> > > !
>> > > boot-start-marker
>> > > boot-end-marker
>> > > !
>> > > !
>> > > ip subnet-zero
>> > > !
>> > > !
>> > > ip cef
>> > > ip ssh time-out 120
>> > > ip ssh authentication-retries 3
>> > > !
>> > > !
>> > > pseudowire-class atom
>> > > encapsulation mpls
>> > > interworking ethernet
>> > > !
>> > > !
>> > > interface Loopback0
>> > > ip address 150.1.2.2 255.255.255.255
>> > > no ip directed-broadcast
>> > > !
>> > > interface FastEthernet0/0
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > !
>> > > interface Serial1/0
>> > > ip address 150.1.12.2 255.255.255.0
>> > > no ip directed-broadcast
>> > > ip router isis
>> > > tag-switching mtu 1600
>> > > tag-switching ip
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/1
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/2
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/3
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/4
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/5
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/6
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/7
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface FastEthernet2/0
>> > > no ip address
>> > > no ip directed-broadcast
>> > > no keepalive
>> > > duplex half
>> > > speed auto
>> > > xconnect 150.1.1.1 12 pw-class atom
>> > > !
>> > > interface FastEthernet2/1
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > duplex half
>> > > speed auto
>> > > !
>> > > router isis
>> > > net 49.0000.0000.0002.00
>> > > passive-interface Loopback0
>> > > !
>> > > ip classless
>> > > !
>> > > !
>> > > !
>> > > tag-switching tdp router-id Loopback0 force
>> > > control-plane
>> > > !
>> > > !
>> > > line con 0
>> > > exec-timeout 0 0
>> > > stopbits 1
>> > > line aux 0
>> > > stopbits 1
>> > > line vty 0 4
>> > > login
>> > > !
>> > > no cns aaa enable
>> > > end
>> > >
>> > > R2#
>> > >
>> > >
>> > >
>> > > R3#sh run
>> > > Building configuration...
>> > >
>> > > Current configuration : 690 bytes
>> > > !
>> > > version 12.0
>> > > service timestamps debug uptime
>> > > service timestamps log uptime
>> > > no service password-encryption
>> > > !
>> > > hostname R3
>> > > !
>> > > boot-start-marker
>> > > boot-end-marker
>> > > !
>> > > !
>> > > ip subnet-zero
>> > > !
>> > > !
>> > > ip cef
>> > > ip ssh time-out 120
>> > > ip ssh authentication-retries 3
>> > > !
>> > > !
>> > > !
>> > > interface FastEthernet0/0
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > !
>> > > interface FastEthernet1/0
>> > > ip address 10.1.34.3 255.255.255.0
>> > > no ip directed-broadcast
>> > > duplex half
>> > > speed auto
>> > > !
>> > > interface FastEthernet1/1
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > duplex half
>> > > speed auto
>> > > !
>> > > ip classless
>> > > !
>> > > !
>> > > !
>> > > control-plane
>> > > !
>> > > !
>> > > line con 0
>> > > exec-timeout 0 0
>> > > stopbits 1
>> > > line aux 0
>> > > stopbits 1
>> > > line vty 0 4
>> > > login
>> > > !
>> > > no cns aaa enable
>> > > end
>> > >
>> > >
>> > >
>> > > R4#sh run
>> > > Building configuration...
>> > >
>> > > Current configuration : 1444 bytes
>> > > !
>> > > version 12.0
>> > > service timestamps debug uptime
>> > > service timestamps log uptime
>> > > no service password-encryption
>> > > !
>> > > hostname R4
>> > > !
>> > > boot-start-marker
>> > > boot-end-marker
>> > > !
>> > > !
>> > > ip subnet-zero
>> > > !
>> > > !
>> > > ip cef
>> > > ip ssh time-out 120
>> > > ip ssh authentication-retries 3
>> > > bridge irb
>> > > !
>> > > !
>> > > !
>> > > interface FastEthernet0/0
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > !
>> > > interface Serial1/0
>> > > no ip address
>> > > no ip directed-broadcast
>> > > encapsulation frame-relay
>> > > serial restart-delay 0
>> > > frame-relay interface-dlci 401
>> > > bridge-group 1
>> > > !
>> > > interface Serial1/1
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/2
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/3
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/4
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/5
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/6
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface Serial1/7
>> > > no ip address
>> > > no ip directed-broadcast
>> > > shutdown
>> > > serial restart-delay 0
>> > > !
>> > > interface BVI1
>> > > ip address 10.1.34.4 255.255.255.0
>> > > no ip directed-broadcast
>> > > !
>> > > ip classless
>> > > !
>> > > !
>> > > !
>> > > control-plane
>> > > !
>> > > bridge 1 protocol ieee
>> > > bridge 1 route ip
>> > > !
>> > > line con 0
>> > > exec-timeout 0 0
>> > > stopbits 1
>> > > line aux 0
>> > > stopbits 1
>> > > line vty 0 4
>> > > login
>> > > !
>> > > no cns aaa enable
>> > > end
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>> --
>> Bryan Bartik
>> CCIE #23707 (R&S, SP), CCNP
>> Sr. Support Engineer - IPexpert, Inc.
>> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Nov 18 2009 - 20:44:02 ART