Re: AToM not working

Tx Bill, done that, no joy. :(

On Wed, Nov 18, 2009 at 7:09 PM, Bill CCIE <tcp.ip4_at_gmail.com> wrote:

> Try removing "frame-relay interface-dlci 104 switched" from int s1/0 in R1.
>
> On Wed, Nov 18, 2009 at 8:52 AM, Service Provider
> <service.providersa_at_gmail.com> wrote:
> > Tx Bryan for that, however my VC between the PE routers is still down,
> that
> > is where my major concern is.
> >
> > R1#sh mpls l2 vc
> >
> > Local intf Local circuit Dest address VC ID
> Status
> > ------------- -------------------------- --------------- ----------
> > ----------
> > Se1/0 FR DLCI 104 150.1.2.2 12 DOWN
> >
> > R2# sh mpls l2 v
> >
> > Local intf Local circuit Dest address VC ID
> Status
> > ------------- -------------------------- --------------- ----------
> > ----------
> > Fa2/0 Ethernet 150.1.1.1 12 DOWN
> >
> > When debugging "debug mpls l2transport packet" there's nothing coming up.
> >
> > On Wed, Nov 18, 2009 at 5:58 PM, Service Provider <
> > service.providersa_at_gmail.com> wrote:
> >
> >> Hi All
> >>
> >> I configured AToM between R3 and R4 but not working. Topology is.
> >>
> >> R4-----------(F/R)--------------R1--------------R2--------------R3
> >> CE PE Eth PE Eth CE
> >> !
> >> Configs below, Please help.
> >>
> >> R1#sh run
> >> Building configuration...
> >>
> >> Current configuration : 1724 bytes
> >> !
> >> version 12.0
> >> service timestamps debug uptime
> >> service timestamps log uptime
> >> no service password-encryption
> >> !
> >> hostname R1
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> ip subnet-zero
> >> !
> >> !
> >> ip cef
> >> ip ssh time-out 120
> >> ip ssh authentication-retries 3
> >> !
> >> !
> >> pseudowire-class atom
> >> encapsulation mpls
> >> interworking ethernet
> >> !
> >> !
> >> interface Loopback0
> >> ip address 150.1.1.1 255.255.255.255
> >> no ip directed-broadcast
> >> !
> >> interface FastEthernet0/0
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> !
> >> interface Serial1/0
> >> no ip address
> >> no ip directed-broadcast
> >> encapsulation frame-relay
> >> serial restart-delay 0
> >> frame-relay interface-dlci 104 switched
> >> !
> >> interface Serial1/1
> >> ip address 150.1.12.1 255.255.255.0
> >> no ip directed-broadcast
> >> ip router isis
> >> tag-switching mtu 1600
> >> tag-switching ip
> >> serial restart-delay 0
> >> !
> >> interface Serial1/2
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/3
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/4
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/5
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/6
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/7
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> router isis
> >> net 49.0000.0000.0001.00
> >> passive-interface Loopback0
> >> !
> >> ip classless
> >> !
> >> !
> >> connect atom Serial1/0 104 l2transport
> >> xconnect 150.1.2.2 12 pw-class atom
> >> !
> >> !
> >> !
> >> tag-switching tdp router-id Loopback0 force
> >> control-plane
> >> !
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> stopbits 1
> >> line aux 0
> >> stopbits 1
> >> line vty 0 4
> >> login
> >> !
> >> no cns aaa enable
> >> end
> >>
> >>
> >>
> >>
> >> R2#sh run
> >> Building configuration...
> >>
> >> Current configuration : 1834 bytes
> >> !
> >> version 12.0
> >> service timestamps debug uptime
> >> service timestamps log uptime
> >> no service password-encryption
> >> !
> >> hostname R2
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> ip subnet-zero
> >> !
> >> !
> >> ip cef
> >> ip ssh time-out 120
> >> ip ssh authentication-retries 3
> >> !
> >> !
> >> pseudowire-class atom
> >> encapsulation mpls
> >> interworking ethernet
> >> !
> >> !
> >> interface Loopback0
> >> ip address 150.1.2.2 255.255.255.255
> >> no ip directed-broadcast
> >> !
> >> interface FastEthernet0/0
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> !
> >> interface Serial1/0
> >> ip address 150.1.12.2 255.255.255.0
> >> no ip directed-broadcast
> >> ip router isis
> >> tag-switching mtu 1600
> >> tag-switching ip
> >> serial restart-delay 0
> >> !
> >> interface Serial1/1
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/2
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/3
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/4
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/5
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/6
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/7
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface FastEthernet2/0
> >> no ip address
> >> no ip directed-broadcast
> >> no keepalive
> >> duplex half
> >> speed auto
> >> xconnect 150.1.1.1 12 pw-class atom
> >> !
> >> interface FastEthernet2/1
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> duplex half
> >> speed auto
> >> !
> >> router isis
> >> net 49.0000.0000.0002.00
> >> passive-interface Loopback0
> >> !
> >> ip classless
> >> !
> >> !
> >> !
> >> tag-switching tdp router-id Loopback0 force
> >> control-plane
> >> !
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> stopbits 1
> >> line aux 0
> >> stopbits 1
> >> line vty 0 4
> >> login
> >> !
> >> no cns aaa enable
> >> end
> >>
> >> R2#
> >>
> >>
> >>
> >> R3#sh run
> >> Building configuration...
> >>
> >> Current configuration : 690 bytes
> >> !
> >> version 12.0
> >> service timestamps debug uptime
> >> service timestamps log uptime
> >> no service password-encryption
> >> !
> >> hostname R3
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> ip subnet-zero
> >> !
> >> !
> >> ip cef
> >> ip ssh time-out 120
> >> ip ssh authentication-retries 3
> >> !
> >> !
> >> !
> >> interface FastEthernet0/0
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> !
> >> interface FastEthernet1/0
> >> ip address 10.1.34.3 255.255.255.0
> >> no ip directed-broadcast
> >> duplex half
> >> speed auto
> >> !
> >> interface FastEthernet1/1
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> duplex half
> >> speed auto
> >> !
> >> ip classless
> >> !
> >> !
> >> !
> >> control-plane
> >> !
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> stopbits 1
> >> line aux 0
> >> stopbits 1
> >> line vty 0 4
> >> login
> >> !
> >> no cns aaa enable
> >> end
> >>
> >>
> >>
> >> R4#sh run
> >> Building configuration...
> >>
> >> Current configuration : 1444 bytes
> >> !
> >> version 12.0
> >> service timestamps debug uptime
> >> service timestamps log uptime
> >> no service password-encryption
> >> !
> >> hostname R4
> >> !
> >> boot-start-marker
> >> boot-end-marker
> >> !
> >> !
> >> ip subnet-zero
> >> !
> >> !
> >> ip cef
> >> ip ssh time-out 120
> >> ip ssh authentication-retries 3
> >> bridge irb
> >> !
> >> !
> >> !
> >> interface FastEthernet0/0
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> !
> >> interface Serial1/0
> >> no ip address
> >> no ip directed-broadcast
> >> encapsulation frame-relay
> >> serial restart-delay 0
> >> frame-relay interface-dlci 401
> >> bridge-group 1
> >> !
> >> interface Serial1/1
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/2
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/3
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/4
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/5
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/6
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface Serial1/7
> >> no ip address
> >> no ip directed-broadcast
> >> shutdown
> >> serial restart-delay 0
> >> !
> >> interface BVI1
> >> ip address 10.1.34.4 255.255.255.0
> >> no ip directed-broadcast
> >> !
> >> ip classless
> >> !
> >> !
> >> !
> >> control-plane
> >> !
> >> bridge 1 protocol ieee
> >> bridge 1 route ip
> >> !
> >> line con 0
> >> exec-timeout 0 0
> >> stopbits 1
> >> line aux 0
> >> stopbits 1
> >> line vty 0 4
> >> login
> >> !
> >> no cns aaa enable
> >> end
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Nov 18 2009 - 19:15:05 ART