RE: VPN Redurect traffic

 HUb spoke topoly using DMVPN infact im trying to say that major branches
comes on HUB RTR Primary with (pimray ISP)
few branches comes on secondary RTR (with Secodary ISP) as i do Vpn remotley
on HUB Primary RTR i can acces my braches which comes on Primary RTR (with
Primary ISP) but not able to access those branhces which come on Secodnary
Rtr(with Secodary ISP)

Primray ISP link terminate on Primary RTR and Secondary ISP Link terminata on
Secodary RTR .Keep 1 think in mind
i configure Remote access Vpn on Primary RTR

Hope you understand my point

> Date: Sat, 14 Nov 2009 08:05:36 +0100
> Subject: Re: VPN Redurect traffic
> From: piotr_at_ccie1.com
> To: faizankhurshid921_at_hotmail.com
> CC: ccielab_at_groupstudy.com
>
> Hi,
> The question is do you need spoke-to-spoke connectivity via Hub router? Do
> you have DMVPN configured or just simple IPSec tunnels from branches to the
> HQ?
>
> Despite of DMVPN, if you have redundant routers on the HQ and you want
> connect your branches via IPSec VPN the best option would be implementation
> of IPSec HSRP redundancy. Of course it works only when you have two
head-end
> routers in the same VLAN so that HSRP can be configured between them. Then
> you configure your spokes to connect to the VIP address of HSRP group.
>
> If you want DMVPN with two hubs you should configure tunnel routing
properly
> to be able to share spokes between hubs. But from you description I assume
> you want all your spokes to be connected to one hub only.
>
> HTH,
> --
> Piotr Matusiak
> CCIE #19860 (R&S, SEC)
> Technical Instructor
> MicronicsTraining.com
>
> If you can't explain it simply, you don't understand it well enough -
> Albert Einstein
>
>
> 2009/11/14 faizan khurshid <faizankhurshid921_at_hotmail.com>
>
> > Dear All
> >
> >
> > Issue regarding HUB and spoke topology .I have Two RTR Primary and
seconday
> > i
> > configured remote access VPN on Head office Permiter RTR to remotely
> > acces
> > my head office and branches .Actually im facing Issue is that the few
> > branches terminate on Secondary RTR which i m not able to access them
> > remotely
> > coz i know the reson i configrued Remote access vpn on permiter RTR
> > .is ther any possbiility to redirect my traffic so im able to remotely
> > access
> > my those branches which comes from secondary router
> >
> >
> >
> >
> > _________________________________________________________________
> > Windows Live: Keep your friends up to date with what you do online.
> >
> >
>
http://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/soci
> >
>
al-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_1:092010<ht
>
tp://www.microsoft.com/middleeast/windows/windowslive/see-it-in-action/soci%0
>
Aal-network-basics.aspx?ocid=PID23461::T:WLMTAGL:ON:WL:en-xm:SI_SB_1:092010>
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
Received on Sat Nov 14 2009 - 12:16:29 ART