Re: Auto-RP announcements

Hi Marakalas,

Add the command: 'ip pim autorp listener' to all routers and try again?
Also check the pim neighbors as Amr mentioned.

Regards,
Wouter

2009/11/7 mreiks <marakalas.molefe_at_gmail.com>

> Configurations.
>
> Hi
>
> Below are the configurations. I have made R2 the MA but still R3 cannot get
> auto-rp announcement.
>
> R1#sh run
> Building configuration...
>
> Current configuration : 952 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R1
> !
> boot-start-marker
> boot-end-marker
> !
> !
> ip subnet-zero
> !
> !
> ip multicast-routing
> ip ssh time-out 120
> ip ssh authentication-retries 3
> !
> !
> !
> interface Loopback0
> ip address 150.1.1.1 255.255.255.0
> no ip directed-broadcast
> ip pim sparse-mode
> !
> interface FastEthernet0/0
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface FastEthernet1/0
> ip address 150.1.12.1 255.255.255.0
> no ip directed-broadcast
> ip pim sparse-mode
> duplex half
> speed auto
> !
> interface FastEthernet1/1
> no ip address
> no ip directed-broadcast
> shutdown
> duplex half
> speed auto
> !
> router ospf 1
> log-adjacency-changes
> network 0.0.0.0 255.255.255.255 area 0
> !
> ip classless
> !
> ip pim send-rp-announce Loopback0 scope 20
> !
> !
> control-plane
> !
> !
> line con 0
> exec-timeout 0 0
> stopbits 1
> line aux 0
> stopbits 1
> line vty 0 4
> login
> !
> no cns aaa enable
> end
>
> R1#
>
> R2#sh run
> Building configuration...
>
> Current configuration : 985 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R2
> !
> boot-start-marker
> boot-end-marker
> !
> !
> ip subnet-zero
> !
> !
> ip multicast-routing
> ip ssh time-out 120
> ip ssh authentication-retries 3
> !
> !
> !
> interface Loopback0
> ip address 150.1.2.2 255.255.255.0
> no ip directed-broadcast
> ip pim sparse-mode
> !
> interface FastEthernet0/0
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface FastEthernet1/0
> ip address 150.1.12.2 255.255.255.0
> no ip directed-broadcast
> ip pim sparse-mode
> duplex half
> speed auto
> !
> interface FastEthernet1/1
> ip address 150.1.23.2 255.255.255.0
> no ip directed-broadcast
> ip pim sparse-mode
> duplex half
> speed auto
> !
> router ospf 1
> log-adjacency-changes
> network 0.0.0.0 255.255.255.255 area 0
> !
> ip classless
> !
> ip pim send-rp-discovery Loopback0 scope 20
> !
> !
> control-plane
> !
> !
> line con 0
> exec-timeout 0 0
> stopbits 1
> line aux 0
> stopbits 1
> line vty 0 4
> login
> !
> no cns aaa enable
> end
>
> R2#
>
> R3#sh run
> Building configuration...
>
> Current configuration : 942 bytes
> !
> version 12.0
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname R3
> !
> boot-start-marker
> boot-end-marker
> !
> !
> ip subnet-zero
> !
> !
> ip multicast-routing
> ip ssh time-out 120
> ip ssh authentication-retries 3
> !
> !
> !
> interface Loopback0
> ip address 150.1.3.3 255.255.255.0
> no ip directed-broadcast
> !
> interface FastEthernet0/0
> no ip address
> no ip directed-broadcast
> shutdown
> !
> interface FastEthernet1/0
> ip address 150.1.23.3 255.255.255.0
> no ip directed-broadcast
> ip pim sparse-mode
> ip igmp join-group 227.7.7.7
> duplex half
> speed auto
> !
> interface FastEthernet1/1
> no ip address
> no ip directed-broadcast
> shutdown
> duplex half
> speed auto
> !
> router ospf 1
> log-adjacency-changes
> network 0.0.0.0 255.255.255.255 area 0
> !
> ip classless
> !
> ip pim autorp listener
> !
> !
> control-plane
> !
> !
> line con 0
> exec-timeout 0 0
> stopbits 1
> line aux 0
> stopbits 1
> line vty 0 4
> login
> !
> no cns aaa enable
> end
>
> R3#
>
> Thanks.
>
> On Sat, Nov 7, 2009 at 9:20 AM, Amr Masoud <amr.eng_at_gmail.com> wrote:
>
> > Make sure that:
> >
> >
> > - You have PIM Sparse-Mode enabled between R2,R3, and there is PIM
> > adjacency
> > - R3 has reach ability to R1's LB, via R2.
> >
> > Regards,
> > Amr Masoud
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Wouter Prins
wp_at_null0.nl
0x301FA912
Blogs and organic groups at http://www.ccie.net