Tx, I have done that and everything is fine, however, I have enabled PIM-SM
on R3's Loopback and now it's working. Any idea why it works only after SM
is enabled on R3?
On Sat, Nov 7, 2009 at 10:06 AM, Amr Masoud <amr.eng_at_gmail.com> wrote:
> Hi ,
>
> your configuration looks fine. I would recommend you to :
>
>
> - Make sure that you can reach R1's LB and R2's LB from R3.
> - Do "debug ip pim auto-rp" on R2 & R3 and check the output.
> - Save & Reload your Routers :)
>
>
> Regards,
> Amr Masoud
Blogs and organic groups at http://www.ccie.net
Received on Sat Nov 07 2009 - 10:13:09 ART
This archive was generated by hypermail 2.2.0 : Tue Dec 01 2009 - 06:36:28 ART