Re: Question: How do you clear frame-relay inverse arp entries?

w/o clearing all the interface configuration just change the encapsulation
to something like ppp and the apply again encapsulation frame-relay

that's it

santiago

On Mon, Oct 26, 2009 at 10:16 PM, Smooth IE <smoothccie_at_googlemail.com>wrote:

> reboot/.
>
> 2009/10/24 Justin Mitchell <jgmitchell_at_gmail.com>
>
> > Doh! That is exactly what I needed. Don't know why I couldn't recall
> > that. That is what I get for working on labs early early in the
> > morning.
> >
> > On Fri, Oct 23, 2009 at 1:36 PM, Bryan Stair <uptown.ccie_at_gmail.com>
> > wrote:
> > > Try copying the configuration for the interface and then remove the
> > > encapsulation frame-relay. It will clear everything, then reapply the
> > > configuration you copied with the right information. Works everytime
> for
> > me
> > > and I never have to reboot the router.
> > >
> > > On Fri, Oct 23, 2009 at 7:51 AM, Ryan West <rwest_at_zyedge.com> wrote:
> > >>
> > >> A simple interface shut w/ clear frame inarp does the trick most of
> > >> the time. You should only need a reload when you have dynamic 0.0.0.0
> > >> mappings.
> > >>
> > >> Sent from handheld.
> > >>
> > >> On Oct 23, 2009, at 6:46 AM, "Justin Mitchell" <jgmitchell_at_gmail.com>
> > >> wrote:
> > >>
> > >> > I just realized what I asked and it is not correct.
> > >> >
> > >> > How do I delete the PVC when I want to assign it to another
> interface?
> > >> > Is a reload really required?
> > >> >
> > >> > Justin
> > >> >
> > >> > On Fri, Oct 23, 2009 at 5:34 AM, Justin Mitchell
> > >> > <jgmitchell_at_gmail.com> wrote:
> > >> >> So I have a bad habit of no shutting interfaces before assigning
> > >> >> interface-dlcis. Is there an easy way to clear inverse arp entries
> so
> > >> >> I can issue the frame-relay interface-dlci command on a sub-
> > >> >> interface?
> > >> >>
> > >> >> Right now I get back the message:
> > >> >>
> > >> >> R4(config-subif)#fram inter 401
> > >> >> %PVC already assigned to interface Serial0/0
> > >> >>
> > >> >> I've tried the clear frame-relay inarp and have even tried deleting
> > >> >> the specific DLCI with no luck. The only resolution I have found
> that
> > >> >> works is shutting the physical interface and then reloading the
> > >> >> router. Not real convenient.
> > >> >>
> > >> >> Here is the interface config
> > >> >>
> > >> >> interface Serial0/0
> > >> >> no ip address
> > >> >> encapsulation frame-relay
> > >> >> shutdown
> > >> >> no frame-relay inverse-arp
> > >> >> frame-relay lmi-type cisco
> > >> >> end
> > >> >>
> > >> >> Thanks
> > >> >> --
> > >> >> Justin G. Mitchell
> > >> >> http://www.google.com/profiles/jgmitchell
> > >> >>
> > >> >
> > >> >
> > >> >
> > >> > --
> > >> > Justin G. Mitchell
> > >> > http://www.google.com/profiles/jgmitchell
> > >> >
> > >> >
> > >> > Blogs and organic groups at http://www.ccie.net
> > >> >
> > >> >
> > _______________________________________________________________________
> > >>
> > >>
> > >> > Subscription information may be found at:
> > >> > http://www.groupstudy.com/list/CCIELab.html
> > >>
> > >>
> > >> Blogs and organic groups at http://www.ccie.net
> > >>
> > >>
> _______________________________________________________________________
> > >> Subscription information may be found at:
> > >> http://www.groupstudy.com/list/CCIELab.html
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >>
> > >
> > >
> >
> >
> >
> > --
> > Justin G. Mitchell
> > http://www.google.com/profiles/jgmitchell
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
-----------------------------
Santiago Enciso
CCNA/CCDA/CCNP
Blogs and organic groups at http://www.ccie.net