Re: QOS Bandwith command not accepted on SVI

Hi Mike,

  Is it ok to police it based on youre SLA or it has to be queued when
congestion occurs ? on the SVI ,if so, is that supported ? .......Also whats
the platform of the Core PE device and the Gig Module which you have
configured as trunk port ?

Thanks

Regards
Anantha Subramanian Natarajan

On Tue, Oct 13, 2009 at 3:44 AM, mike arnold <haynessmith70_at_gmail.com>wrote:

> Dears,
>
> Topology:
>
> Its a Carrier Supporting Carrier Scenario.
>
>
> A------DS/PE--------------CORE/P---------ISP/PE-------P---------ISP/PE------B
>
>
>
> The link between Core and ISP is back to back VRF connected via a layer 2
> trunk.The ISP is creating a sub-interfaces on his 3800 router with
> encapsulation and vlan number. AND on Core am creating a SVI with a same
> vlan number and ip address within the subnet. Am trying to match packets by
> access-list on core and applying a dedicated bandwith for the particular
> customer A as per the SLA with the customer, The bandwith command is not
> accepted on the SVI.It give me this error, " bandwidth command is not
> supported for this interface""
>
> The link between Distribution and core is 10 GIG ,I don't want to limit
> bandwith on distribution switch outbound direction because as i want
> client
> to use 10Gig interface between Distribution and core. I want to implement a
> QOS on egress interface of each VRF on Core facing to ISP
>
> What is the alternate solution u experts can give me.
> Each customer VRF for example:(Customer A) is associated with SVI virtual
> interface on 6500 (Core) and traffic is passed to customer B.
>
> Configs Below:
>
> BGP is routing protocol between CORE nd ISP.
>
> ON 3800 router (ISP End)
> int gig0/0
> no shut
> no ip add
>
> int gig0/0.1
> no shut
> encapsulation dot1q 50
> ip vrf forwarding XX
> ip add 10.10.10.1 255.255.255.254
> ON MY END (CORE)
>
> int gig5/1
> switchport trunk encapsulation dot1q
> switch mode trunk
>
> int vlan 50
> ip vrf forwarding customer A
> ip add 10.10.10.2 255.255.255.254.
>
> Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Oct 13 2009 - 11:43:02 ART