Re: ip nhrp map multicast dynamic

Hi Tolulope,
 
thanks for the help. Actually my question was bit incomplete sorry.I need to
know what the commands highlighted in bold does.if you can help in it.
 
Spoke router:
 
interface Tunnel0
ip address 192.168.1.2 255.255.255.0
no ip redirects
ip mtu 1440
ip nhrp authentication cisco123
ip nhrp map multicast dynamic
ip nhrp map 192.168.1.1 209.168.202.225
ip nhrp map multicast 209.168.202.225
ip nhrp network-id 1
ip nhrp nhs 192.168.1.1
tunnel source FastEthernet0/0
tunnel mode gre multipoint
tunnel key 0
tunnel protection ipsec profile cisco
!

Can you also please tell me how a spoke-to-spoke tunnel is established in a
DMVPN architecture or can you pls share a link for DMVPN concepts pls.
 
thanks once again.
naufal
--- On Tue, 13/10/09, Tolulope Ogunsina <togunsina_at_gmail.com> wrote:

From: Tolulope Ogunsina <togunsina_at_gmail.com>
Subject: Re: ip nhrp map multicast dynamic
To: "Naufal Jamal" <naufalccie_at_yahoo.in>
Date: Tuesday, 13 October, 2009, 4:04 PM

Hi Naufal,
ip nhrp multicast dynamic resolves muticast traffic to dynamically learnt nhrp
resolutions. This command is usually on the Nhrp server.

The ip nhrp multicast <ip-address> resolves multicast traffic to an address
configured. This command is usually on the clients and they point to the
server.

HTH,

On Tue, Oct 13, 2009 at 4:44 PM, Naufal Jamal <naufalccie_at_yahoo.in> wrote:

Hi,

Can someone pls tell me the use of "ip nhrp map multicast dynamic" and "ip
nhrp map multicast <public ip of teh router>"under tunnel interface in a
dmvpn
architecture?

Thank you,
Naufal

     Keep up with people you care about with Yahoo! India Mail.
Learn how. http://in.overview.mail.yahoo.com/connectmore

Blogs and organic groups at http://www.ccie.net
Received on Tue Oct 13 2009 - 21:43:55 ART