Re: Is this a bug?

<have added autoverify support>

Justin, with me, the VTP modes were always set to transparent anytime I came
back to a session which was only partly done. I made it a habit to check
the lab guide, and rework the vlans and vtp mode every time I reworked an
existing lab session.

Enjoy the exercise of doing this, and you can also get some understanding of
the problems with mismatched configs and all ... not that any of us really
need more help with this. .... in my case, I provide myself plenty of
practice with mismatched configs. ;-)

Perhaps the folks from auto verify will care to comment. Have a great day
Justin and team,

Andrew

On Tue, Oct 13, 2009 at 8:47 AM, Justin Mitchell <jgmitchell_at_gmail.com>wrote:

> I'm working on an ASET lab, typical 3550 switch
>
> It happened to me twice this morning...
>
> Press RETURN to get started!
>
>
>
> User Access Verification
>
> Password:
> SW2#s
> Building configuration...
>
> Current configuration : 3096 bytes
> !
> version 12.2
> no service pad
> service timestamps debug uptime
> service timestamps log uptime
> no service password-encryption
> !
> hostname SW2
> !
> no logging console
> enable password cisco
> !
> no aaa new-model
> ip subnet-zero
> no ip domain-lookup
> !
> vtp domain ASET103
> vtp mode transparent
> !
> !
> !
> !
> !
> no file verify auto
> !
> spanning-tree mode pvst
> spanning-tree loopguard default
> spanning-tree extend system-id
> spanning-tree uplinkfast
> !
> vlan internal allocation policy ascending
> !
> vlan 13,100,200,300
> !
> !
> interface Loopback0
> ip address 110.1.8.1 255.255.255.0
> !
> interface FastEthernet0/1
> switchport access vlan 13
> switchport mode dynamic desirable
> !
> interface FastEthernet0/2
> switchport access vlan 200
> switchport mode dynamic desirable
> !
> interface FastEthernet0/3
> switchport access vlan 13
> switchport mode dynamic desirable
> !
> interface FastEthernet0/4
> switchport access vlan 100
> switchport mode dynamic desirable
> !
> interface FastEthernet0/5
> switchport access vlan 300
> switchport mode dynamic desirable
> !
> interface FastEthernet0/6
> switchport access vlan 100
> switchport mode dynamic desirable
> !
> interface FastEthernet0/7
> switchport mode dynamic desirable
> !
> interface FastEthernet0/8
> switchport mode dynamic desirable
> !
> interface FastEthernet0/9
> switchport mode dynamic desirable
> !
> interface FastEthernet0/10
> switchport access vlan 200
> switchport mode dynamic desirable
> !
> interface FastEthernet0/11
> switchport mode dynamic desirable
> !
> interface FastEthernet0/12
> switchport mode dynamic desirable
> spanning-tree guard root
> !
> interface FastEthernet0/13
> switchport mode dynamic desirable
> spanning-tree bpdufilter enable
> !
> interface FastEthernet0/14
> switchport mode dynamic desirable
> !
> interface FastEthernet0/15
> switchport mode dynamic desirable
> !
> interface FastEthernet0/16
> switchport mode dynamic desirable
> !
> interface FastEthernet0/17
> switchport mode dynamic desirable
> !
> interface FastEthernet0/18
> switchport mode dynamic desirable
> !
> interface FastEthernet0/19
> switchport mode dynamic desirable
> !
> interface FastEthernet0/20
> switchport mode dynamic desirable
> !
> interface FastEthernet0/21
> switchport mode dynamic desirable
> !
> interface FastEthernet0/22
> switchport mode dynamic desirable
> !
> interface FastEthernet0/23
> switchport mode dynamic desirable
> !
> interface FastEthernet0/24
> switchport mode dynamic desirable
> !
> interface GigabitEthernet0/1
> switchport mode dynamic desirable
> !
> interface GigabitEthernet0/2
> switchport mode dynamic desirable
> !
> interface Vlan1
> no ip address
> shutdown
> !
> ip classless
> ip http server
> ip http secure-server
> !
> !
> !
> control-plane
> !
> alias exec c conf t
> alias exec s sh run
> alias exec siib sh ip int br
> alias exec sir sh ip route
> alias exec sirr sh ip route rip
> alias exec siro sh ip route ospf
> alias exec sire sh ip route eigrp
> alias exec ss sh spann
> !
> line con 0
> exec-timeout 0 0
> privilege level 15
> password cisco
> logging synchronous
> login
> line vty 0 4
> exec-timeout 0 0
> password cisco
> logging synchronous
> login
> transport input telnet
> line vty 5 15
> exec-timeout 0 0
> password cisco
> logging synchronous
> login
> transport input telnet
> !
> end
>
> SW2#c
> Enter configuration commands, one per line. End with CNTL/Z.
> SW2(config)#int ran f0/7-8
> SW2(config-if-range)#sw a v 59
> % Access VLAN does not exist. Creating vlan 59
> SW2(config-if-range)#sw prot
> SW2(config-if-range)#sw bl m
> SW2(config-if-range)#sw bl u
> SW2(config-if-range)#end
> SW2#wr
> Building configuration...
> [OK]
> SW2#c
> Enter configuration commands, one per line. End with CNTL/Z.
> SW2(config)#int ran f0/23-24
> SW2(config-if-range)#no sw
> SW2(config-if-
>
> Unexpected exception to CPUvector 300, PC = 2F872C
> -Traceback= 2F872C D86258 2F8874 2F8EE8 3C7F44 3C82F0 4401BC 4367CC
>
>
> === Flushing messages (00:01:32 UTC Mon Mar 1 1993) ===
>
> Buffered messages:
>
> 00:00:37: %SPANTREE-5-EXTENDED_SYSID: Extended SysId enabled for type vlan
> 00:00:39: %LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1,
> changed state to
> down
> 00:00:40: %SYS-5-CONFIG_I: Configured from memory by console
> 00:00:40: %SYS-5-RESTART: System restarted --
> Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version
> 12.2(25)SEE, RE
> LEASE SOFTWARE (fc2)
> Copyright (c) 1986-2006 by Cisco Systems, Inc.
> Compiled Fri 03-Feb-06 07:24 by antonino
> 00:00:40: %LINEPROTO-5-UPDOWN: Line protocol on Interface Loopback0,
> changed state
> to up
> 00:00:41: %LINK-5-CHANGED: Interface Vlan1, changed state to
> administratively down
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/1, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/2, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/3, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/4, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/5, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/6, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/10, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/23, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/24, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/20, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/19, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/22, changed state to up
> 00:00:43: %LINK-3-UPDOWN: Interface FastEthernet0/21, changed state to up
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/1, changed
> state to down
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/2, changed
> state to up
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/3, changed
> state to down
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/4, changed
> state to down
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/5, changed
> state to up
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/6, changed
> state to down
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/10, change
> d state to down
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/23, change
> d state to down
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/24, change
> d state to up
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/20, change
> d state to down
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/19, change
> d state to down
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/22, change
> d state to down
> 00:00:44: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/21, change
> d state to down
> 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/1, changed
> state to up
> 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/3, changed
> state to up
> 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/4, changed
> state to up
> 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/6, changed
> state to up
> 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/10, change
> d state to up
> 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/23, change
> d state to up
> 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/20, change
> d state to up
> 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/19, change
> d state to up
> 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/22, change
> d state to up
> 00:00:45: %LINEPROTO-5-UPDOWN: Line protocol on Interface
> FastEthernet0/21, change
> d state to up
> 00:01:25: %SYS-5-CONFIG_I: Configured from console by console
> Queued messages:
> Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version
> 12.2(25)SEE, RE
> LEASE SOFTWARE (fc2)
> Copyright (c) 1986-2006 by Cisco Systems, Inc.
> Compiled Fri 03-Feb-06 07:24 by antonino
>
> Data Access Exception (0x0300)!
> CPU Register Context:
> Vector = 0x00000300 PC = 0x002F872C MSR = 0x0000B030 CR = 0x40000008
> LR = 0x00D86258 CTR = 0x002F864C XER = 0x20000000
> R0 = 0x00D86258 R1 = 0x01FD9180 R2 = 0x00000000 R3 = 0x90640098
> R4 = 0x01FD91C0 R5 = 0x002F864C R6 = 0x00000000 R7 = 0x00000000
> R8 = 0x01A39030 R9 = 0x01A4C780 R10 = 0x01A390C8 R11 = 0x0146D094
> R12 = 0x000167DC R13 = 0xF57F3AE2 R14 = 0x01590000 R15 = 0x015907F8
> R16 = 0x00000000 R17 = 0x00000000 R18 = 0x00000000 R19 = 0x01590000
> R20 = 0x00000001 R21 = 0x015907F8 R22 = 0x01590000 R23 = 0x00000000
> R24 = 0x01A390EE R25 = 0x0000006C R26 = 0x01A390EC R27 = 0x00000007
> R28 = 0x00000002 R29 = 0x01FD91C0 R30 = 0x90640088 R31 = 0x01FD91B0
>
> Stack trace:
> PC = 0x002F872C, SP = 0x01FD9180
> Frame 00: SP = 0x01FD9190 PC = 0x01FD9220
> Frame 01: SP = 0x01FD91A8 PC = 0x00D86258
> Frame 02: SP = 0x01FD91F8 PC = 0x002F8874
> Frame 03: SP = 0x01FD9200 PC = 0x002F8EE8
> Frame 04: SP = 0x01FD9218 PC = 0x003C7F44
> Frame 05: SP = 0x01FD92E0 PC = 0x003C82F0
> Frame 06: SP = 0x01FD92E8 PC = 0x004401BC
> Frame 07: SP = 0x00000000 PC = 0x004367CC
>
> Justin G. Mitchell
> e: jgmitchell_at_gmail.com | skype: justin.g.mitchell
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Andrew Lee Lissitz
all.from.nj_at_gmail.com
Blogs and organic groups at http://www.ccie.net