mpls vpn question

topology looks like this: CE-PE-P-PE-CE

the PE routers run MPBGP/iBGP between them, the P router is only doing MPLS.

On the CE/PE routers, i can see the routes from either side, but i am unable
to pass traffic.

PE1:

PE1#sh ip route vrf A

Routing Table: A
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static
rout
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     1.0.0.0/32 is subnetted, 1 subnets
B 1.1.1.1 is directly connected, 00:11:19, Loopback1
C 192.168.1.0/24 is directly connected, FastEthernet0/1
B 192.168.2.0/24 [200/0] via 10.2.2.1, 00:11:34
PE1#ping vrf A 192.168.2.1 source 192.168.1.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.2.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.1.1
.....
Success rate is 0 percent (0/5)

PE2:
PE2#sh ip route vrf B

Routing Table: B
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static
route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     1.0.0.0/32 is subnetted, 1 subnets
B 1.1.1.1 [200/0] via 10.1.1.1, 00:11:34
B 192.168.1.0/24 [200/0] via 10.1.1.1, 00:11:37
C 192.168.2.0/24 is directly connected, FastEthernet0/1

PE2#ping vrf B 192.168.1.1 source 192.168.2.1

Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 192.168.1.1, timeout is 2 seconds:
Packet sent with a source address of 192.168.2.1
.....
Success rate is 0 percent (0/5)

help?

Blogs and organic groups at http://www.ccie.net
Received on Mon Oct 12 2009 - 14:35:26 ART