Re: DNS issue?

What is the benefit of doing this? Do you have a private link to do this over? Seems a lot of hassle to me, but if the business requires it and the bandwidth allows, then the easiest may be a proxy...

Regards,
Tony Pearce,

Capital Support Limited

Tel: +44 (0) 20 7458 1274
Mob: +44 (0) 79122 48683

----- Original Message -----
From: Nanda, Manoj (DS-1) <Manoj.Nanda_at_DRS-DefenseSolutions.com>
To: Tony Pearce; ccielab_at_groupstudy.com <ccielab_at_groupstudy.com>
Sent: Tue Sep 22 22:42:08 2009
Subject: RE: DNS issue?

Tony: Thanks, you got it right, but I guess my upstream ISP will not let me advertise the ARIN addresses in Europe? I have to backhaul the traffic to US for peering with my US ISP!!!

From: Tony Pearce [mailto:TPearce_at_Capitalsupport.com]
Sent: Tuesday, September 22, 2009 5:22 PM
To: Nanda, Manoj (DS-1); 'ccielab_at_groupstudy.com'
Subject: Re: DNS issue?

More info required.
However I think you are referring to the way google identifies its customers. There is nothing you can do here unless you come from a US IP range or use a US proxy.

Regards,
Tony Pearce,

Capital Support Limited

Tel: +44 (0) 20 7458 1274
Mob: +44 (0) 79122 48683

----- Original Message -----
From: nobody_at_groupstudy.com <nobody_at_groupstudy.com>
To: Cisco certification <ccielab_at_groupstudy.com>
Sent: Tue Sep 22 21:39:24 2009
Subject: DNS issue?

Guys: I have a real life issue, customers using RIPE addresses and they
see the web page in German and the search contents from Europe. The
customer wants to see US Google web page and also the search results. I
was initially thinking it could be a DNS issue but looks like something
else plays a role here. Any help will be greatly appreciated.
r/Manoj

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Piotr Matusiak
Sent: Tuesday, September 22, 2009 12:34 PM
To: Antonio Soares
Cc: GAURAV MADAN; Cisco certification
Subject: Re: Dynamips for SP

Hi Antonio,

Take a look at your own website:
http://www.ccie18473.net/dynamips/dynamips.htm#atom-atmompls-aal5

Comments:
Not possible to achieve with Dynamips.

Regards,

-- 
Piotr Matusiak
CCIE #19860 (R&S, SEC)
2009/9/22 Antonio Soares <amsoares_at_netcabo.pt>:
> You can do AToM:
>
> http://www.ccie18473.net/ 
>
> See the mini-scenarios section.
>
>
> Regards,
>
> Antonio Soares, CCIE #18473 (R&S)
> amsoares_at_netcabo.pt 
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf 
Of Piotr Matusiak
> Sent: terga-feira, 22 de Setembro de 2009 15:06
> To: GAURAV MADAN
> Cc: Cisco certification
> Subject: Re: Dynamips for SP
>
> Hi Gaurav,
>
> A. I use Dell XPS M1330 laptop and running GNS3/Dynamips under Ubuntu
and Windows Vista. There is Core2Duo 2x2.4 CPU, 4GB of RAM,
> 7200rpm HDD and GNS3 works smooth on this. The difference between
Linux and Windows is in stability. I can successfully run 14
> routers under Ubuntu while I can only run 6-8 under Windows.
>
> B. More info:
> http://7200emu.hacki.at 
> http://www.ipflow.utc.fr/index.php/Cisco_7200_Simulator 
> http://www.gns3.net/ 
>
> C. Then number of devices depends on the platform and software
requirements. For example you can run less 7200 with 12.4T ADV ENT
> software than 2600 with IP Base IOS. For SP I used 7200 with 12.2S and
I can run 10-12 routers under Ubuntu without any problems.
>
> D. No chance for LS1010 emulation, but you can simulate basic ATM
interfaces with virtual ATM switch (again basic functionality, no
> advanced config). You cannot simulate AToM and some L2VPNs.
>
> E. I only run my own topology, but it is similar to IPE.
>
> F. Building virtual rack from scratch is a matter of 10min especially
under GNS3. If you want to use Dynamips and play with manually
> created NET files, this can take 2hrs and you can make lots of
mistakes.
>
> HTH,
>
> --
> Piotr Matusiak
> CCIE #19860 (R&S, SEC)
>
>
>
>
> 2009/9/22 GAURAV MADAN <gauravmadan1177_at_gmail.com>:
>> Hi Friends
>>
>> I am a CCIE R$S and while studying for R$S ; I practiced on real
stuff
>> . No dynamips
>>
>> Now that I wish to learn some SP stuff ; I am in resource crunch and
>> heard of dynamips ..
>>
>> Can you guys please answer following ques
>>
>> [A] I can buy a PC ? whats the best config I shd go for . I say best
>> keeping in mind the future use as well ? Ppl running on laptops
please
>> let me know how good / bad experice is ?
>>
>> [B] Where can I get the documentation of how to setup the things on
my new PC ?
>>
>> [C] How many devices can I simulate ?
>>
>> [D] Can we simulate ATM stuff like LS1010 as well ?
>>
>> [E] Are there people who have simulated vendors like INE / IPE
>> topologies for SP lab on dynamips .. How good is their experience ?
>>
>> [F] Lastly ; how long will this take and in hiw much time can i be
>> accessing real stuff :)
>>
>> I am sure these questions are silly for l already using this ,, But
>> cant help .. I need to get this working ,,
>>
>> Gaurav Madan.
>>
>>
>> Blogs and organic groups at http://www.ccie.net 
>>
>>