Re: PPP over ATM

Hi,
I think that R1 should be directly connected to R2 without using ATM switch
( PVC should be the Same also )

BR//
Khalid

2009/9/13 Evan Weston <evan_weston_at_hotmail.com>

> Hi all,
>
> Hoping someone can answer me this - I'm sure it s just me not knowing how
> to
> use dynamips properly. No matter what I do I can't get these to negotiate
> PPP:
>
> R1:
> interface ATM1/0
> no ip address
> no atm ilmi-keepalive
> !
> interface ATM1/0.1 point-to-point
> no snmp trap link-status
> pvc 0/100
> encapsulation aal5snap
> protocol ppp Virtual-Template1
> !
> !
> interface Virtual-Template1
> ip address 10.10.10.1 255.255.255.0
>
> R2:
> interface ATM1/0
> no ip address
> no atm ilmi-keepalive
> !
> interface ATM1/0.1 point-to-point
> no snmp trap link-status
> pvc 0/200
> encapsulation aal5snap
> protocol ppp Virtual-Template1
> !
> !
> interface Virtual-Template1
> ip address 10.10.10.2 255.255.255.0
>
> .NET file:
> autostart = False
> [localhost:7200]
>
> workingdir = /opt/CISCO/ATM-PPP
>
> [[7200]]
> image =
> /opt/CISCO/IOS-Images/c7200-advipservicesk9-mz.124-15.T1.EXTRACTED.bin
> npe = npe-400
> ram = 256
> disk0 = 0
> disk1 = 0
> mmap = True
> idlepc = 0x6257aaf0
>
> [[Router R1]]
> model = 7200
> console = 2001
> autostart = False
> A1/0 = A1 1
>
> [[Router R2]]
> model = 7200
> console = 2002
> autostart = False
> A1/0 = A1 2
>
> [[ATMSW A1]]
> 1:0:100 = 2:0:200
>
> Cheers,
> Evan
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Khalid DOUMAL
Blogs and organic groups at http://www.ccie.net