Re: OSPF problem..pls help.

i think problem in dynamips FR maping...

Sep 13 11:20:38.243: OSPF: Rcv pkt from 1.1.24.2, Serial0/0/0, area =====>
Serial0/0/0
> 0.0.0.
>
> interface Serial0/1/0 ===========>
> ip address 1.1.24.4 255.255.255.0
> encapsulation frame-relay
> ip ospf network point-to-point
> frame-relay map ip 1.1.24.4 402
> frame-relay map ip 1.1.24.2 402 broadcast
> no frame-relay inverse-arp

----- Original Message -----
From: "Mohamed El Henawy" <m.henawy_at_link.net>
To: "Naufal Jamal" <naufalccie_at_yahoo.in>; <ccielab_at_groupstudy.com>
Sent: Sunday, September 13, 2009 1:07 PM
Subject: Re: OSPF problem..pls help.

> Not really quite sure but I think problem in the R-IDs perhaps you changed
> it after it already selected the interface.try to hard code it..also check
> the subnet mask
> try to reload the babies again :)
>
> ----- Original Message -----
> From: "Naufal Jamal" <naufalccie_at_yahoo.in>
> To: <ccielab_at_groupstudy.com>
> Sent: Sunday, September 13, 2009 1:16 PM
> Subject: OSPF problem..pls help.
>
>
>> Hi,
>>
>> I have a full-mesh of ospf network but having problems between R4 and R2
>> point-to-point network type .here is the config/debug on both the
>> routers.the
>> neighbourship never comes up.
>>
>>
>> R4
>>
>> interface Serial0/1/0
>> ip address 1.1.24.4 255.255.255.0
>> encapsulation frame-relay
>> ip ospf network point-to-point
>> frame-relay map ip 1.1.24.4 402
>> frame-relay map ip 1.1.24.2 402 broadcast
>> no frame-relay inverse-arp
>> end
>>
>> R4
>>
>> (config-if)#do debug ip ospf ev
>> OSPF events debugging is on
>> R4(config-if)#
>> *Sep 13 11:20:38.131: OSPF: Send hello to 224.0.0.5 area 2 on Serial0/1/0
>> from
>> 1
>> .1.24.4
>> *Sep 13 11:20:38.243: OSPF: Rcv pkt from 1.1.24.2, Serial0/0/0, area
>> 0.0.0.0
>> mismatch area 0.0.0.2 in the header
>>
>> sh ip ospf ne
>> Neighbor ID Pri State Dead Time Address
>> Interface
>> 1.1.3.3 1 FULL/DROTHER 00:01:51 1.1.100.3
>> Serial0/0/0
>> 1.1.6.6 1 FULL/BDR 00:01:47 1.1.100.6
>> Serial0/0/0
>>
>> router ospf 1
>> log-adjacency-changes
>> network 1.1.4.4 0.0.0.0 area 0
>> network 1.1.24.4 0.0.0.0 area 2
>> network 1.1.100.4 0.0.0.0 area 0
>> neighbor 1.1.100.3
>> neighbor 1.1.100.6
>>
>> R2
>>
>>
>> R2(config-if)#
>> *Mar 1 16:50:33.663: OSPF: Send hello to 224.0.0.5 area 2 on
>> FastEthernet0/0
>> fr
>> om 1.1.26.2
>> *Mar 1 16:50:34.491: OSPF: Rcv hello from 1.1.4.4 area 2 from Serial0/0
>> 1.1.24.
>> 4
>> *Mar 1 16:50:34.491: OSPF: Send immediate hello to nbr 1.1.4.4, src
>> address
>> 1.1
>> .24.4, on Serial0/0
>> *Mar 1 16:50:34.495: OSPF: Send hello to 224.0.0.5 area 2 on Serial0/0
>> from
>> 1.1
>> .24.2
>> *Mar 1 16:50:34.495: OSPF: End o
>> *Mar 1 16:58:55.403: OSPF: Rcv hello from 1.1.6.6 area 2 from
>> FastEthernet0/0
>> 1
>> .1.26.6
>> *Mar 1 16:58:55.403: OSPF: End of hello processing
>> R2(config-if)#
>> R2(config-if)#do
>> *Mar 1 16:58:58.567: OSPF: Send hello to 224.0.0.5 area 2 on Serial0/0
>> from
>> 1.1
>> .24.2
>> R2(config-if)#do u all
>> All possible debugging has been turned off
>> R2(config-if)#do sh ip ospf ne
>> Neighbor ID Pri State Dead Time Address
>> Interface
>> 1.1.4.4 0 INIT/ - 00:00:32 1.1.24.4
>> Serial0/0
>> 1.1.6.6 1 FULL/BDR 00:00:33 1.1.26.6
>> FastEthernet0/0
>>
>> interface Serial0/0
>> ip address 1.1.24.2 255.255.255.0
>> encapsulation frame-relay
>> ip ospf network point-to-point
>> frame-relay map ip 1.1.24.2 204
>> frame-relay map ip 1.1.24.4 204 broadcast
>> no frame-relay inverse-arp
>> frame-relay lmi-type cisco
>> end
>>
>> router ospf 1
>> log-adjacency-changes
>> network 1.1.2.2 0.0.0.0 area 2
>> network 1.1.24.2 0.0.0.0 area 2
>> network 1.1.26.2 0.0.0.0 area 2
>>
>> neighborship with R3 and R6 is o.k dont understand why it is not comin up
>> between R2 and R4 p2p link...
>>
>> Thanks,
>> Naufal
>>
>>
>> See the Web&#39;s breaking stories, chosen by people like you.
>> Check out Yahoo! Buzz. http://in.buzz.yahoo.com/
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>
>
> --------------------------------------------------------------------------------
>
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.409 / Virus Database: 270.13.94/2367 - Release Date: 09/13/09
> 05:50:00
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>

--------------------------------------------------------------------------------

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.409 / Virus Database: 270.13.94/2367 - Release Date: 09/13/09
05:50:00

Blogs and organic groups at http://www.ccie.net
Received on Sun Sep 13 2009 - 13:21:32 ART