OSPF problem..pls help.

Hi,
 
I have a full-mesh of ospf network but having problems between R4 and R2
point-to-point network type .here is the config/debug on both the routers.the
neighbourship never comes up.
 

R4
 
interface Serial0/1/0
 ip address 1.1.24.4 255.255.255.0
 encapsulation frame-relay
 ip ospf network point-to-point
 frame-relay map ip 1.1.24.4 402
 frame-relay map ip 1.1.24.2 402 broadcast
 no frame-relay inverse-arp
end

R4
 
(config-if)#do debug ip ospf ev
OSPF events debugging is on
R4(config-if)#
*Sep 13 11:20:38.131: OSPF: Send hello to 224.0.0.5 area 2 on Serial0/1/0 from
1
.1.24.4
*Sep 13 11:20:38.243: OSPF: Rcv pkt from 1.1.24.2, Serial0/0/0, area 0.0.0.0
      mismatch area 0.0.0.2 in the header
 
sh ip ospf ne
Neighbor ID Pri State Dead Time Address Interface
1.1.3.3 1 FULL/DROTHER 00:01:51 1.1.100.3 Serial0/0/0
1.1.6.6 1 FULL/BDR 00:01:47 1.1.100.6 Serial0/0/0
 
router ospf 1
 log-adjacency-changes
 network 1.1.4.4 0.0.0.0 area 0
 network 1.1.24.4 0.0.0.0 area 2
 network 1.1.100.4 0.0.0.0 area 0
 neighbor 1.1.100.3
 neighbor 1.1.100.6
 
R2
 

R2(config-if)#
*Mar 1 16:50:33.663: OSPF: Send hello to 224.0.0.5 area 2 on FastEthernet0/0
fr
om 1.1.26.2
*Mar 1 16:50:34.491: OSPF: Rcv hello from 1.1.4.4 area 2 from Serial0/0
1.1.24.
4
*Mar 1 16:50:34.491: OSPF: Send immediate hello to nbr 1.1.4.4, src address
1.1
.24.4, on Serial0/0
*Mar 1 16:50:34.495: OSPF: Send hello to 224.0.0.5 area 2 on Serial0/0 from
1.1
.24.2
*Mar 1 16:50:34.495: OSPF: End o
*Mar 1 16:58:55.403: OSPF: Rcv hello from 1.1.6.6 area 2 from FastEthernet0/0
1
.1.26.6
*Mar 1 16:58:55.403: OSPF: End of hello processing
R2(config-if)#
R2(config-if)#do
*Mar 1 16:58:58.567: OSPF: Send hello to 224.0.0.5 area 2 on Serial0/0 from
1.1
.24.2
R2(config-if)#do u all
All possible debugging has been turned off
R2(config-if)#do sh ip ospf ne
Neighbor ID Pri State Dead Time Address Interface
1.1.4.4 0 INIT/ - 00:00:32 1.1.24.4 Serial0/0
1.1.6.6 1 FULL/BDR 00:00:33 1.1.26.6
FastEthernet0/0
 
interface Serial0/0
 ip address 1.1.24.2 255.255.255.0
 encapsulation frame-relay
 ip ospf network point-to-point
 frame-relay map ip 1.1.24.2 204
 frame-relay map ip 1.1.24.4 204 broadcast
 no frame-relay inverse-arp
 frame-relay lmi-type cisco
end
 
router ospf 1
 log-adjacency-changes
 network 1.1.2.2 0.0.0.0 area 2
 network 1.1.24.2 0.0.0.0 area 2
 network 1.1.26.2 0.0.0.0 area 2
 
neighborship with R3 and R6 is o.k dont understand why it is not comin up
between R2 and R4 p2p link...
 
Thanks,
Naufal

      See the Web's breaking stories, chosen by people like you.
Check out Yahoo! Buzz. http://in.buzz.yahoo.com/

Blogs and organic groups at http://www.ccie.net
Received on Sun Sep 13 2009 - 15:46:20 ART