Re: Usage of set level command in the route-map

Hi All,

  Tried the set level command with backbone and stub-area option for some
reason didn;t find any differences.The topology used is explained below

R0---Area1 nssa ----R1 ---Area0 ----R2

R1 is been created with lo10(192168.40.1/32) and the same is been
redistributed inside the ospf process with set level backbone.

In the R2 database I saw 192.168.40.1 with LSA Type 5 under area0 and LSA
Type 7 under Area1.

When the level is set with stub-area,found the similiar
characteristics.Kindly correct me if I am understanding something wrong.

Thank You

Regards
Anantha Subramania Natarajan

On Sat, Sep 5, 2009 at 11:57 PM, Anantha Subramanian Natarajan <
anantha.natarajan_at_gravitant.com> wrote:

> Thanks Darby
>
> Regards
> Anantha Subramanian Natarajan
>
> On Sat, Sep 5, 2009 at 11:50 PM, Darby Weaver <darby.weaver_at_gmail.com>wrote:
>
>> I'm working on some specific issues right now I have to get straight. If
>> no one answers I'll give it a shot.
>>
>>
>>
>> On Sun, Sep 6, 2009 at 12:03 AM, Anantha Subramanian Natarajan <
>> anantha.natarajan_at_gravitant.com> wrote:
>>
>>> No problem Darby and Thank You
>>>
>>> Regards
>>> Anantha Subramanian Natarajan
>>>
>>> On Sat, Sep 5, 2009 at 10:34 PM, Darby Weaver <darby.weaver_at_gmail.com>wrote:
>>>
>>>> Good question but I've got to admit I don't recall exploring that
>>>> option.
>>>>
>>>> Perhaps someone else has?
>>>>
>>>> On Sat, Sep 5, 2009 at 4:51 PM, Anantha Subramanian Natarajan <
>>>> anantha.natarajan_at_gravitant.com> wrote:
>>>>
>>>>> Hi All,
>>>>>
>>>>> I was exploring and understanding the options available with route-map
>>>>> particulary in relation to redistribution.I am trying to understand the
>>>>> usage of set level command as pasted below
>>>>>
>>>>> R2(config-route-map)#set level ?
>>>>> *backbone Import into OSPF backbone area
>>>>> * level-1 Import into a level-1 area
>>>>> level-1-2 Import into level-1 and level-2
>>>>> level-2 Import into level-2 sub-domain
>>>>> *stub-area Import into OSPF NSSA area*
>>>>> **
>>>>> I ignored the level-1,level-1-2 and level-2 assuming it is related to
>>>>> redistribution into IS-IS as it is not in the Lab syllabus.But trying
>>>>> to
>>>>> understand the other two options (backbone and stub-area),what it is
>>>>> actually meant to do.I choosed a loopback and redistributed into OSPF
>>>>> by
>>>>> setting the level as stub-area to understand what it actually means,I
>>>>> see as
>>>>> usual in OSPF database as LSA type 5 .What actually it is meant to do
>>>>> ?....Kindly help me to understand
>>>>>
>>>>> Thank you very much
>>>>>
>>>>> Regards
>>>>> Anantha Subramanian Natarajan
>>>>>
>>>>>
>>>>> Blogs and organic groups at http://www.ccie.net
>>>>>
>>>>> _______________________________________________________________________
>>>>> Subscription information may be found at:
>>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Darby Weaver
>>>> Network Engineer
>>>>
>>>> 407-802-7394
>>>> darbyweaver_at_yahoo.com
>>>>
>>>
>>>
>>
>>
>> --
>> Darby Weaver
>> Network Engineer
>>
>> 407-802-7394
>> darbyweaver_at_yahoo.com

Blogs and organic groups at http://www.ccie.net
Received on Sun Sep 06 2009 - 08:37:05 ART