Re: Show ip eigrp neighbor detail --Version Field

Thanks for confirming Andrew

Regards
Anantha Subramanian Natarajan

On Fri, Sep 4, 2009 at 6:40 PM, ALL From_NJ <all.from.nj_at_gmail.com> wrote:

> Good call ... on a 3560E:
>
> SW4(config-if)#do show ip eigrp nei det
>
> EIGRP-IPv4:(1) neighbors for process 1
>
> H Address Interface Hold Uptime SRTT RTO Q
> Seq (sec) (ms) Cnt Num
> 0 77.77.77.7 Vl77 10 00:00:08 1 200 0 1
> Version 4.0/3.0, Retrans: 1, Retries: 0
> Topology-ids from peer - 0
>
>
> I am running Version 12.2(50)SE2
>
>
>
> On Fri, Sep 4, 2009 at 7:23 PM, Anantha Subramanian Natarajan <
> anantha.natarajan_at_gravitant.com> wrote:
>
>> Hi Andrew,
>>
>> Hahaha good one ...........Thanks for your reference .......
>>
>> Actually the EIGRP neighbor is a switch (3750 running 12.2(44)SE5)
>> and now I am assuming that for switches it may be 3.0 and for routers is
>> 1.2...........Any thoughts on these lines .....Still not able to understand
>> what actually that numbers refer to .
>>
>> Thank You
>>
>> Regards
>> Anantha Subramanian Natarajan
>>
>>
>>
>> On Fri, Sep 4, 2009 at 6:15 PM, ALL From_NJ <all.from.nj_at_gmail.com>wrote:
>>
>>> Version 3.0 is the current version of CCIE lab. It will change to 4.0
>>> after Oct 18th.
>>>
>>> lol ...
>>>
>>> Here is a command reference for:
>>>
>>> http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_eig2.html#wp1012982
>>>
>>> In my lab, the version numbers show the same as the do in the doc cd:
>>>
>>> R2>sho ip eigrp nei det
>>>
>>> IP-EIGRP neighbors for process 1
>>> H Address Interface Hold Uptime SRTT RTO Q
>>> Seq (sec) (ms) Cnt Num
>>> 0 162.17.96.1 Se0/1/0 13 00:00:15 2 200 0
>>> 3 Version 12.4/1.2, Retrans: 0, Retries: 0, Prefixes: 1
>>>
>>> As mentioned, my two routers show the same version info as the docs. I
>>> am running 12.4(15)T4 and 12.4(9)T7 for these two particular routers. What
>>> version code are you running?
>>>
>>> Andrew Lissitz
>>>
>>>
>>>
>>> On Fri, Sep 4, 2009 at 2:58 PM, Anantha Subramanian Natarajan <
>>> anantha.natarajan_at_gravitant.com> wrote:
>>>
>>>> Hi All,
>>>>
>>>> I was looking on the "show ip eigrp neighbor detail" command and
>>>> curious
>>>> about the version field.I here by pasting the sample o/p for your kind
>>>> reference.
>>>>
>>>> R6#sh ip eigrp neighbors detail
>>>> IP-EIGRP neighbors for process 10
>>>> H Address Interface Hold Uptime SRTT RTO Q
>>>> Seq
>>>> (sec) (ms) Cnt
>>>> Num
>>>> 0 10.1.1.1 Fa0/1.1 11 1d05h 2
>>>> 200 0 472
>>>>
>>>> Version 12.2/*3.0*, Retrans: 11, Retries: 0, Prefixes: 6
>>>>
>>>> I was able to understand that,first part of the Version field indicates
>>>> the
>>>> Neighbor IOS version and what about the second part on the version field
>>>> 3.0
>>>> means.
>>>>
>>>> Thanks for all your help
>>>>
>>>> Regards
>>>> Anantha Subramanian Natarajan
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Andrew Lee Lissitz
>>> all.from.nj_at_gmail.com
>>>
>>
>>
>
>
> --
> Andrew Lee Lissitz
> all.from.nj_at_gmail.com

Blogs and organic groups at http://www.ccie.net
Received on Fri Sep 04 2009 - 18:52:37 ART