Re: Show ip eigrp neighbor detail --Version Field

Good call ... on a 3560E:

SW4(config-if)#do show ip eigrp nei det

EIGRP-IPv4:(1) neighbors for process 1

H Address Interface Hold Uptime SRTT RTO Q
Seq (sec) (ms) Cnt Num
0 77.77.77.7 Vl77 10 00:00:08 1 200 0 1
Version 4.0/3.0, Retrans: 1, Retries: 0
   Topology-ids from peer - 0

I am running Version 12.2(50)SE2

On Fri, Sep 4, 2009 at 7:23 PM, Anantha Subramanian Natarajan <
anantha.natarajan_at_gravitant.com> wrote:

> Hi Andrew,
>
> Hahaha good one ...........Thanks for your reference .......
>
> Actually the EIGRP neighbor is a switch (3750 running 12.2(44)SE5)
> and now I am assuming that for switches it may be 3.0 and for routers is
> 1.2...........Any thoughts on these lines .....Still not able to understand
> what actually that numbers refer to .
>
> Thank You
>
> Regards
> Anantha Subramanian Natarajan
>
>
>
> On Fri, Sep 4, 2009 at 6:15 PM, ALL From_NJ <all.from.nj_at_gmail.com> wrote:
>
>> Version 3.0 is the current version of CCIE lab. It will change to 4.0
>> after Oct 18th.
>>
>> lol ...
>>
>> Here is a command reference for:
>>
>> http://www.cisco.com/en/US/docs/ios/iproute/command/reference/irp_eig2.html#wp1012982
>>
>> In my lab, the version numbers show the same as the do in the doc cd:
>>
>> R2>sho ip eigrp nei det
>>
>> IP-EIGRP neighbors for process 1
>> H Address Interface Hold Uptime SRTT RTO Q
>> Seq (sec) (ms) Cnt Num
>> 0 162.17.96.1 Se0/1/0 13 00:00:15 2 200 0 3
>> Version 12.4/1.2, Retrans: 0, Retries: 0, Prefixes: 1
>>
>> As mentioned, my two routers show the same version info as the docs. I am
>> running 12.4(15)T4 and 12.4(9)T7 for these two particular routers. What
>> version code are you running?
>>
>> Andrew Lissitz
>>
>>
>>
>> On Fri, Sep 4, 2009 at 2:58 PM, Anantha Subramanian Natarajan <
>> anantha.natarajan_at_gravitant.com> wrote:
>>
>>> Hi All,
>>>
>>> I was looking on the "show ip eigrp neighbor detail" command and
>>> curious
>>> about the version field.I here by pasting the sample o/p for your kind
>>> reference.
>>>
>>> R6#sh ip eigrp neighbors detail
>>> IP-EIGRP neighbors for process 10
>>> H Address Interface Hold Uptime SRTT RTO Q
>>> Seq
>>> (sec) (ms) Cnt
>>> Num
>>> 0 10.1.1.1 Fa0/1.1 11 1d05h 2
>>> 200 0 472
>>>
>>> Version 12.2/*3.0*, Retrans: 11, Retries: 0, Prefixes: 6
>>>
>>> I was able to understand that,first part of the Version field indicates
>>> the
>>> Neighbor IOS version and what about the second part on the version field
>>> 3.0
>>> means.
>>>
>>> Thanks for all your help
>>>
>>> Regards
>>> Anantha Subramanian Natarajan
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>> --
>> Andrew Lee Lissitz
>> all.from.nj_at_gmail.com
>>
>
>

-- 
Andrew Lee Lissitz
all.from.nj_at_gmail.com
Blogs and organic groups at http://www.ccie.net