Re: Tc default value in GTS

It appears to be variable:

R1(config-if)#int s1/1
R1(config-if)#traffic-shape rate 56000
R1(config-if)#do sho traf

Interface Se1/1
       Access Target Byte Sustain Excess Interval Increment Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
- 56000 1988 7952 7952 142 994 -

R1(config-if)#traffic-shape rate 64000
R1(config-if)#do sho traf

Interface Se1/1
       Access Target Byte Sustain Excess Interval Increment Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
- 64000 2000 8000 8000 125 1000 -

R1(config-if)#traffic-shape rate 96000
R1(config-if)#do sho traf

Interface Se1/1
       Access Target Byte Sustain Excess Interval Increment Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
- 96000 1992 7968 7968 83 996 -

R1(config-if)#traffic-shape rate 512000
R1(config-if)#do sho traf

Interface Se1/1
       Access Target Byte Sustain Excess Interval Increment Adapt
VC List Rate Limit bits/int bits/int (ms) (bytes)
Active
- 512000 3200 12800 12800 25 1600 -
R1(config-if)#

-hth

On Sun, Aug 30, 2009 at 12:06 PM, Anantha Subramanian Natarajan <
anantha.natarajan_at_gravitant.com> wrote:

> Hi All,
>
> When I was going through the Generic Traffic Shaping (GTS) ,I am seeing 2
> different things,in one place I am seeing the default Tc value is 125ms
> while summarizing the difference between different shaping methods,I am
> seeing the default Tc value as "Variable" for GTS.Kindly provide me an
> insight on the same.
>
> Thanks for the help
>
> Regards
> Anantha Subramanian Natarajan
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Bryan Bartik
CCIE #23707 (R&S), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
Blogs and organic groups at http://www.ccie.net