Re: port channels Question

I would create one channel per neighbor. Of course Interface range works as
you mentioned (channel-protocol lacp +
channel-group 1 mode active/passive) then you can provide cmds under
port-channel accordingly.

On Thu, Aug 27, 2009 at 1:49 PM, Nanda, Manoj (DS-1) <MNanda_at_drs-tsi.com>wrote:

> Guys: Need to create lacp port channels among four switches. What is the
> best way to do this without creating confusion. If I do this using
> interface range command and configure channel group/protocols it puts
> all the interfaces on the same port channel (1!). Of course I can go and
> change the port channel.
> I think I should have two different port channels per switch!
> Any suggestion!
> Thanks
> r/manoj
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Jobby Jose
> Sent: Thursday, August 27, 2009 12:26 PM
> To: ccielab_at_groupstudy.com
> Subject: CCIE # 25260
>
> Hi All,
>
> I am glad to share that i got my number in R&S track yesterday.I would
> like
> to thank Internetwork Expert team for their excellent material and labs.
> And
> also thanks to all guys here for their posts, which is one of the best
> KB i
> have.
>
>
> Best Regards
> Jobby Jose
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Aug 27 2009 - 14:22:48 ART