Re: Question on IP Source Quard.

Hi Brian,

Either if the port is trunk link and have different VLAN on both side or if
it is a access port and other switch has directly connected PCs of different
network.
I would like to understand is it possible to configure IP source binding on
SW1 for the remote network.

Appreciate your inputs.

Thx and regds
Vinoth G
On Mon, Aug 24, 2009 at 6:58 PM, Bryan Bartik <bbartik_at_ipexpert.com> wrote:

> Vinoth,
>
> I don't understand, are you saying you have a link between switches that is
> not a trunk but rather an access port with different VLANs on either side?
> If so, the link is treated like any other access port.
>
>
> On Mon, Aug 24, 2009 at 1:46 PM, Vinoth Kannan Ganapathy <
> ccieprep4vinoth_at_gmail.com> wrote:
>
>> Hi Malik,
>>
>> So you mean to say, it is valid to configure IP source binding for the
>> remote network - which is not part of that VLAN network.
>> Am I right ?
>>
>> -Vinoth G
>>
>> On Mon, Aug 24, 2009 at 12:29 PM, S Malik <ccie.09_at_gmail.com> wrote:
>>
>> > I think, it should work for all the untrusted ports.
>> >
>> >
>> > On Mon, Aug 24, 2009 at 2:39 PM, Vinoth Kannan Ganapathy <
>> > ccieprep4vinoth_at_gmail.com> wrote:
>> >
>> >>
>> >> Hi Malik,
>> >>
>> >> I meant the port gi2/2 is trunk which allows vlan 20 as well..
>> >> Hope we can configure IPSG on trunk.
>> >>
>> >> Thx and regds
>> >> Vinoth G
>> >>
>> >>
>> >>
>> >> On Mon, Aug 24, 2009 at 11:20 AM, S Malik <ccie.09_at_gmail.com> wrote:
>> >>
>> >>> ip source binding 70.0.0.8 0000.7000.0008 vl 20 int gi 2/2
>> >>>
>> >>> How would you comunicate with the other switch in a different vlan
>> >>> without trunking?
>> >>>
>> >>>
>> >>>
>> >>> On Mon, Aug 24, 2009 at 1:45 PM, Vinoth Kannan Ganapathy <
>> >>> ccieprep4vinoth_at_gmail.com> wrote:
>> >>>
>> >>>> Hi Experts,
>> >>>>
>> >>>> I have a quick question that with the help of static source binding
>> >>>> configuration, is it valid/possible to configure for the IP address
>> of
>> >>>> the
>> >>>> remote network ?
>> >>>>
>> >>>> Lets say I have a SW1 configured with Vlan 20 which is in 20 network
>> and
>> >>>> one
>> >>>> of the ports say gi2/2 of vlan 20 connected to another switch which
>> has
>> >>>> different VLANs configured.
>> >>>> is it possible/valid to configure
>> >>>> ip source binding 70.0.0.8 0000.7000.0008 vl 20 int gi 2/2
>> >>>>
>> >>>> I would really appreciate your input on this.
>> >>>>
>> >>>> Thx and regds
>> >>>> Vinoth G
>> >>>>
>> >>>>
>> >>>> Blogs and organic groups at http://www.ccie.net
>> >>>>
>> >>>>
>> _______________________________________________________________________
>> >>>> Subscription information may be found at:
>> >>>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Bryan Bartik
> CCIE #23707 (R&S), CCNP
> Sr. Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com <http://www.ipexpert.com/>

Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 24 2009 - 21:00:44 ART