MSDP/Anycast Configuration

All,

I was doing MSDP/Anycast configuration and somehow I don't see the "ip msdp
peer 150.18.3.3 remote-as" command in the running config. Am I missing
something?

R2
++
!
interface Loopback0
 ip address 150.18.2.2 255.255.255.255
 ip pim sparse-dense-mode
!
interface Loopback1
 ip address 150.18.18.1 255.255.255.255
 ip pim sparse-dense-mode
!
interface Ethernet0/0
 ip address 174.18.123.2 255.255.255.0
 ip pim sparse-dense-mode
!
router bgp 200
 no synchronization
 bgp router-id 150.18.2.2
 bgp log-neighbor-changes
 neighbor 150.18.3.3 remote-as 300
 neighbor 150.18.3.3 ebgp-multihop 255
 neighbor 150.18.3.3 update-source Loopback0
 no auto-summary
!
ip pim autorp listener
!
ip pim send-rp-announce Loopback1 scope 16 group-list R2_GROUPS
!
ip msdp peer 150.18.3.3 connect-source Loopback0
ip msdp peer 150.18.3.3 remote-as 300 <--XXXX
ip msdp originator-id Loopback0
!
ip access-list standard R2_GROUPS
 permit 239.0.0.9
 permit 239.0.0.7
!

R3
++
!
interface Loopback0
 ip address 150.18.3.3 255.255.255.0
 ip pim sparse-dense-mode
!
interface Loopback1
 ip address 150.18.18.1 255.255.255.255
 ip pim sparse-dense-mode
!
interface Ethernet0/0
 ip address 174.18.123.3 255.255.255.0
 ip pim sparse-dense-mode
!
router bgp 300
 no synchronization
 bgp router-id 150.18.3.3
 bgp log-neighbor-changes
 neighbor 150.18.2.2 remote-as 200
 neighbor 150.18.2.2 ebgp-multihop 255
 neighbor 150.18.2.2 update-source Loopback0
 no auto-summary
!
ip pim autorp listener
!
ip pim send-rp-announce Loopback1 scope 16 group-list R5_GROUPS
!
ip msdp peer 150.18.2.2 connect-source Loopback0
ip msdp peer 150.18.2.2 remote-as 200 <--XXXX
ip msdp originator-id Loopback0
!
ip access-list standard R5_GROUPS
 permit 239.0.0.10
 permit 239.0.0.8
!
Received on Tue Aug 11 2009 - 10:52:48 ART