Re: 2801 issue

You have to perform a Break, to get into ROMMON mode if you want to do an upgrade. Do this before it loads this far.

-----Original Message-----
From: Mark Anthony <mctony_at_ymail.com>
To: ccie groupstudy <ccielab_at_groupstudy.com>
Sent: Fri, Aug 7, 2009 8:59 am
Subject: 2801 issue

Hello GS,

I have an issue with my 2801 router, it cannot boot to this mode:

Press RETURN to get started!

*Aug 7 16:04:02.059: %LINEPROTO-5-UPDOWN: Line protocol on Interface
VoIP-Null0, changed state to up
*Aug 7 16:04:03.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/0, changed state to down
*Aug 7 16:04:03.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface
FastEthernet0/1, changed state to down
*Aug 7 16:04:04.395: %SYS-5-CONFIG_I: Configured from memory by console
*Aug 7 16:04:04.835: %SYS-5-RESTART: System restarted --
Cisco IOS Software, 2801 Software (C2801-SPSERVICESK9-M), Version 12.4(3g),
RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 06-Nov-06 03:00 by alnguyen
*Aug 7 16:04:04.839: %SNMP-5-COLDSTART: SNMP agent on host Router is
undergoing a cold start
*Aug 7 16:04:06.267: %LINK-5-CHANGED: Interface FastEthernet0/0, changed
state to administratively down
*Aug 7 16:04:06.447: %LINK-5-CHANGED: Interface FastEthernet0/1, changed
state to administratively down
*Aug 7 16:04:07.687: %DSPRM-5-UPDOWN: DSP 1 in slot 0, changed state to up

Can someone please help me and tell me what exactly to do. I intend to install
a new IOS on this router but since I cannot get to the privileged mode, how do
I do it.

Someone please help me with what to do, thanks in advance.

Cheers.

Blogs and organic groups at http://www.ccie.net
Received on Fri Aug 07 2009 - 12:33:10 ART