RE: VSS and PFC3A

Good to know.
Thanks all for your precious input.
Ram

"Reza Toghraee" <reza.toghraee_at_visionaire.com>
Sent by: Reza Toghraee <toghraee.transit_at_gmail.com>
08/04/2009 01:11 PM

To
"'KRATTIGER Lukas'" <Lukas.KRATTIGER_at_nextiraone.ch>, "'Andy Reid'"
<ccie_at_reid.it>, Ram Shummoogum/Quebec/IBM_at_IBMCA
cc
<ccielab_at_groupstudy.com>
Subject
RE: VSS and PFC3A

Correct,

I have a VSS pair, with WS-X6748 with CFC.
The only problem which I faced was the IOS, which must be SXI, not SXH.
SXH
does not support FWSM modules in VSS.

Regards
Reza
CCIE R&S

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
KRATTIGER Lukas
Sent: Tuesday, August 04, 2009 7:56 PM
To: Andy Reid; Ram Shummoogum
Cc: ccielab_at_groupstudy.com
Subject: AW: VSS and PFC3A

Hi Andy
This is not correct.
Only the cards with VSL on it need to have DFC3C and the Sup has to be
PFC3c.
All the rest has to be a 67xx-Linecard but no matter if CFC or DFC3c.
Important is, if DFC, it has to be 3c.
Cheers
-Lukas

________________________________

Von: nobody_at_groupstudy.com im Auftrag von Andy Reid
Gesendet: Di 04.08.2009 16:47
An: Ram Shummoogum
Cc: ccielab_at_groupstudy.com
Betreff: Re: VSS and PFC3A

Hi Ram,

Yes, you have to have PFC3C to run in VSS mode. In addition, all modules
equipped with DFC's must also be DFC3C.

http://www.cisco.com/en/US/partner/prod/collateral/switches/ps5718/ps9336/pr

od_qas0900aecd806ed74b.html

regards Andy

Ram Shummoogum wrote:
> Hi:
>
> Do you think I can convert my 6500 series to VSS with a PFC3A on my sup.
> Or do I absolutely need the PFC3C or PFC3CXL.
>
>
> Thanks
> Ram
>
>
> Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
Received on Tue Aug 04 2009 - 13:55:20 ART