RE: new R&S lab 4.0 home lab upgrade.

Joe,

Agreed thanks.
---- Tyson Scott <tscott_at_ipexpert.com> wrote:
> DLS152
>
> There is no VPN in v4.0 for R&S. L3VPN is not IPSec it is a virtualization
> of the routing table.
>
> I would Go with Tony's recommendation of the 4 x 3560's/3750 with Dynamips.
> You would probably want a cheap non-cisco switch that supports Dot1q to
> break out your various routers to your 3750's. You can use 7206VXR in
> Dynamips that will support the latest code. A $1500 workstation that can be
> used for a lot of other stuff is a lot better to swallow then network
> equipment you can't use for anything else.
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S and Security
> Technical Instructor - IPexpert, Inc.
>
> Telephone: +1.810.326.1444
> Cell: +1.248.504.7309
> Fax: +1.810.454.0130
> Mailto: tscott_at_ipexpert.com
>
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of Joe
> Astorino
> Sent: Monday, August 03, 2009 4:36 PM
> To: dls152_at_cox.net
> Cc: ccielab_at_groupstudy.com
> Subject: Re: new R&S lab 4.0 home lab upgrade.
>
> Well MPLS L3 VPN you can definitely do with 3640s no problem. The zone
> based firewall and IOS firewall are just feature sets of the IOS as far as I
> know.
>
> On Mon, Aug 3, 2009 at 4:31 PM, <dls152_at_cox.net> wrote:
>
> > Joe,
> >
> > Thanks. I am just wondering how to work the vnp and firewall requires for
> > new 4.0 blueprint starting in October. I don't want to spend any money if
> I
> > can avoid it.
> > ---- Joe Astorino <jastorino_at_ipexpert.com> wrote:
> > > Hey! I'm all for buying new and exciting gear but to be honest, I think
> > you
> > > are doing quite well!!! You can do pretty much everything on a 3750
> that
> > > you can on a 3560. Those are some NICE units. Your 3640's can
> > definitely
> > > do MPLS as I have some in my own home rack. Backbone routers don't need
> > to
> > > be anything special so you are OK there. If anything, you might add 2
> > more
> > > 3640s instead of the 2600s and maybe replace that 1700 with one of the
> > > 2600s.
> > >
> > > If you really can't resist spending money, get some 2811s : )
> > >
> > > My 2 cents
> > >
> > > On Mon, Aug 3, 2009 at 3:29 PM, <dls152_at_cox.net> wrote:
> > >
> > > > I am looking to upgrade my home lab rack and need some help trying to
> > > > determine what is needed for new r&s lab? Can anyone help?
> > > >
> > > > Current lab:
> > > > 4x 2600's
> > > > 2x 3640's
> > > > 1x 1700 backbone routers
> > > > 2x 2600 backbone routers
> > > > 4x 3750's
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
> _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > >
> > >
> > > --
> > > Regards,
> > >
> > > Joe Astorino - CCIE #24347 R&S
> > > Technical Instructor - IPexpert, Inc.
> > > Cell: +1.586.212.6107
> > > Fax: +1.810.454.0130
> > > Mailto: jastorino_at_ipexpert.com
> >
>
>
>
> --
> Regards,
>
> Joe Astorino - CCIE #24347 R&S
> Technical Instructor - IPexpert, Inc.
> Cell: +1.586.212.6107
> Fax: +1.810.454.0130
> Mailto: jastorino_at_ipexpert.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 03 2009 - 14:37:48 ART