Re: What do you think - OEQ?

From: <Keegan.Holley_at_sungard.com>
Date: Tue, 28 Jul 2009 15:43:38 -0400

That brings up an interesting question as to how exactly these are scored.
 For example would he be given less credit than someone who did not
specify the default priority at all? In an interview I would consider the
candidate that was 1 too high to be more knowledgeable.

Re: What do you think - OEQ?

Anthony Sequeira
to:
Molomo
07/28/09 10:35 AM

Sent by:
nobody_at_groupstudy.com
Cc:
ccielab
Please respond to Anthony Sequeira

You are on the right track here for sure. In fact, I have had passing
students actually elaborate down two different paths because the Cisco
question was so vague. For example, their answer looked something like
this - "If you meant A with your question, the answer is B. But if you
meant C with your question, the answer is D." :-)

What you cannot do is write a novel. They have made it clear that they
will not even bother to read it.

Also, when elaborating, be very sure you are truly technically
accurate. I notice in your example below you have 32769*MAC. It should
be 32768 + MAC. :-)

We certainly do not want to inadvertently give the proctor another
reason to doubt our expertise!

Keep up the great work Molomo!

Warmest Regards,

Anthony J. Sequeira, CCIE #15626
http://www.INE.com

Test your Core Knowledge today!
Q: Four NAT terms are used to describe IP addresses in a NAT scenario.
The address of HostA (inside your corp) as known to HostB (Internet)
is typically referred to as which term?
A: The Inside Global Address
More Info:
http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094831.shtml

On Jul 28, 2009, at 10:21 AM, Molomo wrote:

> Expert,
>
> With OEQ can I give an example, or that might be considered over
> elaborating?
>
> For example wth the question below, which answer will be more
> appropriate?
>
> Question:
>
> Between catalyst switch and transparent bridge which is more likely to
> be spanning tree root?
>
> Answer 1 :
>
> Transparent bridge because it does not use ext system id.
>
> Answer 2 :
>
> Transparent bridge because it does not use ext system id, eg with Vlan
> 1 default priority, catalyst will have BID of 32769 *MAC and
> transparent bridge will have BID 32768*MAC
>
>
> Regards,
> Molomo
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 28 2009 - 15:43:38 ART

This archive was generated by hypermail 2.2.0 : Sat Aug 01 2009 - 13:10:23 ART