Re: ip ospf network type point-to-point on farme-relay

Thanks for the response gary

Regards
Anantha Subramanian Natarajan

On Mon, Jul 27, 2009 at 2:29 PM, Gary Duncanson <
gary.duncanson_at_googlemail.com> wrote:

> Anantha,
>
> Seems fair to me although I must say I haven't checked. I believe the
> default is one where DR/BDR is actually required.
>
> Regards
> Gary
> ----- Original Message ----- From: "Anantha Subramanian Natarajan" <
> anantha.natarajan_at_gravitant.com>
> To: "Cisco certification" <ccielab_at_groupstudy.com>
> Sent: Monday, July 27, 2009 7:47 PM
> Subject: ip ospf network type point-to-point on farme-relay
>
>
> Hi All,
>>
>> I have a question on when we run ip ospf network type point-to-point on a
>> physical frame-relay interface.The question is,when the OSPF neighbor
>> adjacency comes up,the o/p of "show ip ospf neighbor" priority field shows
>> "0".I am assuming because since there is not a concept of DR/BDR on this
>> network type.Is this understanding right.
>>
>> In one of my labworkbook output,I see the o/p had priority of 1 on the
>> "show
>> ip ospf neighbor" for the above networktype and topology.So,I just want to
>> verify my understanding and hopefully not missing something basic.
>>
>> Thanks for the assistance.
>>
>> Regards
>> Anantha Subramanian Natarajan
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jul 27 2009 - 14:31:19 ART