Re: OT:SPA ERROR

It does.

SIP-601 is supported from IOS 12.0(32)S or later versions.
But SPA-1X10GE-WL-V2 is supported from IOS 12.0(33)S or later versions.

So he needs at least IOS 12.0(33)S version.

Alex

jack daniels wrote:
> Hi ,
>
> The most important part as mentioned by scott , is this SPA supported on SIP
> 601
>
> http://www.cisco.com/en/US/prod/collateral/routers/ps167/product_data_sheet09
> 00aecd80465682.html
>
>
> Regard
>
>
> On 7/20/09, jack daniels <jckdaniels12_at_gmail.com> wrote:
>
>> Hi,
>>
>> is that we found out the unsupport from
>>
>> Link -
>>
>>
>>
>>
> http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/confi
> guration/12000Series/12sovsip.html
>
>> Cisco IOS Release 12.0(33)S
>>
>> Support for the following hardware by the Cisco 12000 SIP-600 and the
>> Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router:
>>
>> 1-Port 10-Gigabit Ethernet SPA [WAN-PHY] (SPA-1X10GE-WL-V2)
>>
>> Thanks and Regards
>> J.Daniels
>>
>>
>> On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
>>
>>> Dang. Dude was right. You're gonna need that newer version. I just
>>> realized we're on SY8 and doing it without the WAN 10gigE (just the
>>> LAN).
>>>
>>> 12.0(33)S
>>>
>>> And that crap should start working.
>>>
>>> Thanks,
>>>
>>> --William McCall
>>> On Mon, Jul 20, 2009 at 12:31 PM, jack daniels<jckdaniels12_at_gmail.com>
>>> wrote:
>>>
>>>> Router#sh gsr power-mgr
>>>>
>>>> Power management summary
>>>> ------------------------
>>>> Powershelf type: DC Power Supplies
>>>> Operating phase: RUNNING_PHASE
>>>> Feature state : Enabled
>>>> Operating mode : REDUNDANT
>>>>
>>>> Total supply power: 4800 W
>>>> Route processors: 60 W
>>>> Linecards: 1440 W
>>>> Chassis components: 946 W
>>>> Total inuse power: 2446 W
>>>> Remaining: 2354 W
>>>>
>>>> PEM1 present, supplying up to 2400 watts; uptime 0d00h05m
>>>> PEM2 present, supplying up to 2400 watts; uptime 0d00h05m
>>>> PEM3 present, supplying up to 2400 watts; uptime 0d00h05m
>>>> PEM4 present, supplying up to 2400 watts; uptime 0d00h05m
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
>>>>
>>>>> I mean to say that it should work in 32(SY6).
>>>>>
>>>>> sh gsr power-mgr would be awesome too. I forgot to ask for that.
>>>>>
>>>>> Thanks,
>>>>>
>>>>> --William McCall
>>>>>
>>>>> On Mon, Jul 20, 2009 at 12:27 PM, jack daniels<jckdaniels12_at_gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Hi William,
>>>>>>
>>>>>> Is that the case 12.0(32)SY6 has no support for this SPA. But you
>>>>>>
>>> mean
>>>
>>>>>> any
>>>>>> other IOS release of same train SY has it , can u please confirm the
>>>>>>
>>> IOS
>>>
>>>>>> train having this SPA support. Is IOS upgrade only wayout for this ?
>>>>>>
>>>>>>
>>>>>> Thanks and Regards
>>>>>> J.Daniels
>>>>>>
>>>>>> On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
>>>>>>
>>>>>>> It would look like you would need to upgrade, but the SY is a
>>>>>>>
>>> separate
>>>
>>>>>>> branch from the S. I have confirmed that we use this SPA here with
>>>>>>>
>>> SY
>>>
>>>>>>> code.
>>>>>>>
>>>>>>> 2009/7/20 Alex H. Ryu <r.hyunseog_at_ieee.org>:
>>>>>>>
>>>>>>>> You may have to upgrade the IOS to support this card.
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
> http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/confi
> guration/12000Series/12sovsip.html
>
>>>>>>>> SPA-1X10GE-WL-V2 requires 12.0(33)S at minimum, and you are
>>>>>>>>
>>> running
>>>
>>>>>>>> 12.0(32)SY6.
>>>>>>>>
>>>>>>>>
>>>>>>>> Alex
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>> jack daniels wrote:
>>>>>>>>
>>>>>>>>> Hi group,
>>>>>>>>>
>>>>>>>>> I have a queery . I have a card SPA-1X10GE-WL-V2 and I'm instling
>>>>>>>>> the
>>>>>>>>> same
>>>>>>>>> into SIP-601 of 12416 chassis. IOS version is
>>>>>>>>> c12kprp-k4p-mz.120-32.SY6.
>>>>>>>>>
>>>>>>>>> But this SPA is not getting detected it gives error -
>>>>>>>>>
>>>>>>>>> Router#
>>>>>>>>> SLOT 15:00:01:38: %EE192-5-LC_INVALID_SPACONFIG: Invalid SPA
>>>>>>>>> configuration
>>>>>>>>> for l
>>>>>>>>> inecard in slot 1340:
>>>>>>>>> Invalid spa type when getting the spa power.
>>>>>>>>> SLOT 15:00:01:38: %EE192-5-LC_EXCEED_POWER: Line Card exceeds
>>>>>>>>>
>>> total
>>>
>>>>>>>>> power
>>>>>>>>> allowe
>>>>>>>>> d in slot 15
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Please suggest if someone has faced this issue
>>>>>>>>>
>>>>>>>>> Thanks and Regards
>>>>>>>>> J.Daniels
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Blogs and organic groups at http://www.ccie.net
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>>>>>>>>
>>> _______________________________________________________________________
>>>
>>>>>>>>> Subscription information may be found at:
>>>>>>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>>>>>>
>>>>>>>> Blogs and organic groups at http://www.ccie.net
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>>>>>>>
>>> _______________________________________________________________________
>>>
>>>>>>>> Subscription information may be found at:
>>>>>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>>>>>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jul 20 2009 - 13:05:22 ART