Re: OT:SPA ERROR

Thanks all :) , I will upgrade the IOS and will let u guys know the result
of that :)
But Alex , I ment DOES SIP601 support this WL-V2 SPA.

Regards
J.Daniels

On 7/20/09, Alex H. Ryu <r.hyunseog_at_ieee.org> wrote:
>
>
> It does.
>
> SIP-601 is supported from IOS 12.0(32)S or later versions.
> But SPA-1X10GE-WL-V2 is supported from IOS 12.0(33)S or later versions.
>
> So he needs at least IOS 12.0(33)S version.
>
>
> Alex
>
>
> jack daniels wrote:
> > Hi ,
> >
> > The most important part as mentioned by scott , is this SPA supported on
> SIP
> > 601
> >
> >
> http://www.cisco.com/en/US/prod/collateral/routers/ps167/product_data_sheet09
> > 00aecd80465682.html
> >
> >
> > Regard
> >
> >
> > On 7/20/09, jack daniels <jckdaniels12_at_gmail.com> wrote:
> >
> >> Hi,
> >>
> >> is that we found out the unsupport from
> >>
> >> Link -
> >>
> >>
> >>
> >>
> >
> http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/confi
> > guration/12000Series/12sovsip.html
> >
> >> Cisco IOS Release 12.0(33)S
> >>
> >> Support for the following hardware by the Cisco 12000 SIP-600 and the
> >> Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router:
> >>
> >> 1-Port 10-Gigabit Ethernet SPA [WAN-PHY] (SPA-1X10GE-WL-V2)
> >>
> >> Thanks and Regards
> >> J.Daniels
> >>
> >>
> >> On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
> >>
> >>> Dang. Dude was right. You're gonna need that newer version. I just
> >>> realized we're on SY8 and doing it without the WAN 10gigE (just the
> >>> LAN).
> >>>
> >>> 12.0(33)S
> >>>
> >>> And that crap should start working.
> >>>
> >>> Thanks,
> >>>
> >>> --William McCall
> >>> On Mon, Jul 20, 2009 at 12:31 PM, jack daniels<jckdaniels12_at_gmail.com>
> >>> wrote:
> >>>
> >>>> Router#sh gsr power-mgr
> >>>>
> >>>> Power management summary
> >>>> ------------------------
> >>>> Powershelf type: DC Power Supplies
> >>>> Operating phase: RUNNING_PHASE
> >>>> Feature state : Enabled
> >>>> Operating mode : REDUNDANT
> >>>>
> >>>> Total supply power: 4800 W
> >>>> Route processors: 60 W
> >>>> Linecards: 1440 W
> >>>> Chassis components: 946 W
> >>>> Total inuse power: 2446 W
> >>>> Remaining: 2354 W
> >>>>
> >>>> PEM1 present, supplying up to 2400 watts; uptime 0d00h05m
> >>>> PEM2 present, supplying up to 2400 watts; uptime 0d00h05m
> >>>> PEM3 present, supplying up to 2400 watts; uptime 0d00h05m
> >>>> PEM4 present, supplying up to 2400 watts; uptime 0d00h05m
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>>
> >>>> On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
> >>>>
> >>>>> I mean to say that it should work in 32(SY6).
> >>>>>
> >>>>> sh gsr power-mgr would be awesome too. I forgot to ask for that.
> >>>>>
> >>>>> Thanks,
> >>>>>
> >>>>> --William McCall
> >>>>>
> >>>>> On Mon, Jul 20, 2009 at 12:27 PM, jack daniels<
> jckdaniels12_at_gmail.com>
> >>>>> wrote:
> >>>>>
> >>>>>> Hi William,
> >>>>>>
> >>>>>> Is that the case 12.0(32)SY6 has no support for this SPA. But you
> >>>>>>
> >>> mean
> >>>
> >>>>>> any
> >>>>>> other IOS release of same train SY has it , can u please confirm the
> >>>>>>
> >>> IOS
> >>>
> >>>>>> train having this SPA support. Is IOS upgrade only wayout for this ?
> >>>>>>
> >>>>>>
> >>>>>> Thanks and Regards
> >>>>>> J.Daniels
> >>>>>>
> >>>>>> On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
> >>>>>>
> >>>>>>> It would look like you would need to upgrade, but the SY is a
> >>>>>>>
> >>> separate
> >>>
> >>>>>>> branch from the S. I have confirmed that we use this SPA here with
> >>>>>>>
> >>> SY
> >>>
> >>>>>>> code.
> >>>>>>>
> >>>>>>> 2009/7/20 Alex H. Ryu <r.hyunseog_at_ieee.org>:
> >>>>>>>
> >>>>>>>> You may have to upgrade the IOS to support this card.
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >
> http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/confi
> > guration/12000Series/12sovsip.html
> >
> >>>>>>>> SPA-1X10GE-WL-V2 requires 12.0(33)S at minimum, and you are
> >>>>>>>>
> >>> running
> >>>
> >>>>>>>> 12.0(32)SY6.
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> Alex
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>> jack daniels wrote:
> >>>>>>>>
> >>>>>>>>> Hi group,
> >>>>>>>>>
> >>>>>>>>> I have a queery . I have a card SPA-1X10GE-WL-V2 and I'm instling
> >>>>>>>>> the
> >>>>>>>>> same
> >>>>>>>>> into SIP-601 of 12416 chassis. IOS version is
> >>>>>>>>> c12kprp-k4p-mz.120-32.SY6.
> >>>>>>>>>
> >>>>>>>>> But this SPA is not getting detected it gives error -
> >>>>>>>>>
> >>>>>>>>> Router#
> >>>>>>>>> SLOT 15:00:01:38: %EE192-5-LC_INVALID_SPACONFIG: Invalid SPA
> >>>>>>>>> configuration
> >>>>>>>>> for l
> >>>>>>>>> inecard in slot 1340:
> >>>>>>>>> Invalid spa type when getting the spa power.
> >>>>>>>>> SLOT 15:00:01:38: %EE192-5-LC_EXCEED_POWER: Line Card exceeds
> >>>>>>>>>
> >>> total
> >>>
> >>>>>>>>> power
> >>>>>>>>> allowe
> >>>>>>>>> d in slot 15
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Please suggest if someone has faced this issue
> >>>>>>>>>
> >>>>>>>>> Thanks and Regards
> >>>>>>>>> J.Daniels
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>> Blogs and organic groups at http://www.ccie.net
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>>>>>>>>
> >>> _______________________________________________________________________
> >>>
> >>>>>>>>> Subscription information may be found at:
> >>>>>>>>> http://www.groupstudy.com/list/CCIELab.html
> >>>>>>>>>
> >>>>>>>> Blogs and organic groups at http://www.ccie.net
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>>>>>>>
> >>> _______________________________________________________________________
> >>>
> >>>>>>>> Subscription information may be found at:
> >>>>>>>> http://www.groupstudy.com/list/CCIELab.html
> >>>>>>>>
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jul 20 2009 - 23:42:47 ART