Re: OT:SPA ERROR

Hi ,

The most important part as mentioned by scott , is this SPA supported on SIP
601

http://www.cisco.com/en/US/prod/collateral/routers/ps167/product_data_sheet09
00aecd80465682.html

Regard

On 7/20/09, jack daniels <jckdaniels12_at_gmail.com> wrote:
>
> Hi,
>
> is that we found out the unsupport from
>
> Link -
>
>
>
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/confi
guration/12000Series/12sovsip.html
>
>
> Cisco IOS Release 12.0(33)S
>
> Support for the following hardware by the Cisco 12000 SIP-600 and the
> Cisco 12000 SIP-601 was introduced on the Cisco 12000 series router:
>
> 1-Port 10-Gigabit Ethernet SPA [WAN-PHY] (SPA-1X10GE-WL-V2)
>
> Thanks and Regards
> J.Daniels
>
>
> On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
>>
>> Dang. Dude was right. You're gonna need that newer version. I just
>> realized we're on SY8 and doing it without the WAN 10gigE (just the
>> LAN).
>>
>> 12.0(33)S
>>
>> And that crap should start working.
>>
>> Thanks,
>>
>> --William McCall
>> On Mon, Jul 20, 2009 at 12:31 PM, jack daniels<jckdaniels12_at_gmail.com>
>> wrote:
>> > Router#sh gsr power-mgr
>> >
>> > Power management summary
>> > ------------------------
>> > Powershelf type: DC Power Supplies
>> > Operating phase: RUNNING_PHASE
>> > Feature state : Enabled
>> > Operating mode : REDUNDANT
>> >
>> > Total supply power: 4800 W
>> > Route processors: 60 W
>> > Linecards: 1440 W
>> > Chassis components: 946 W
>> > Total inuse power: 2446 W
>> > Remaining: 2354 W
>> >
>> > PEM1 present, supplying up to 2400 watts; uptime 0d00h05m
>> > PEM2 present, supplying up to 2400 watts; uptime 0d00h05m
>> > PEM3 present, supplying up to 2400 watts; uptime 0d00h05m
>> > PEM4 present, supplying up to 2400 watts; uptime 0d00h05m
>> >
>> >
>> >
>> >
>> >
>> >
>> > On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
>> >>
>> >> I mean to say that it should work in 32(SY6).
>> >>
>> >> sh gsr power-mgr would be awesome too. I forgot to ask for that.
>> >>
>> >> Thanks,
>> >>
>> >> --William McCall
>> >>
>> >> On Mon, Jul 20, 2009 at 12:27 PM, jack daniels<jckdaniels12_at_gmail.com>
>> >> wrote:
>> >> > Hi William,
>> >> >
>> >> > Is that the case 12.0(32)SY6 has no support for this SPA. But you
>> mean
>> >> > any
>> >> > other IOS release of same train SY has it , can u please confirm the
>> IOS
>> >> > train having this SPA support. Is IOS upgrade only wayout for this ?
>> >> >
>> >> >
>> >> > Thanks and Regards
>> >> > J.Daniels
>> >> >
>> >> > On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
>> >> >>
>> >> >> It would look like you would need to upgrade, but the SY is a
>> separate
>> >> >> branch from the S. I have confirmed that we use this SPA here with
>> SY
>> >> >> code.
>> >> >>
>> >> >> 2009/7/20 Alex H. Ryu <r.hyunseog_at_ieee.org>:
>> >> >> > You may have to upgrade the IOS to support this card.
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>>
http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/confi
guration/12000Series/12sovsip.html
>> >> >> >
>> >> >> > SPA-1X10GE-WL-V2 requires 12.0(33)S at minimum, and you are
>> running
>> >> >> > 12.0(32)SY6.
>> >> >> >
>> >> >> >
>> >> >> > Alex
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> >
>> >> >> > jack daniels wrote:
>> >> >> >> Hi group,
>> >> >> >>
>> >> >> >> I have a queery . I have a card SPA-1X10GE-WL-V2 and I'm instling
>> >> >> >> the
>> >> >> >> same
>> >> >> >> into SIP-601 of 12416 chassis. IOS version is
>> >> >> >> c12kprp-k4p-mz.120-32.SY6.
>> >> >> >>
>> >> >> >> But this SPA is not getting detected it gives error -
>> >> >> >>
>> >> >> >> Router#
>> >> >> >> SLOT 15:00:01:38: %EE192-5-LC_INVALID_SPACONFIG: Invalid SPA
>> >> >> >> configuration
>> >> >> >> for l
>> >> >> >> inecard in slot 1340:
>> >> >> >> Invalid spa type when getting the spa power.
>> >> >> >> SLOT 15:00:01:38: %EE192-5-LC_EXCEED_POWER: Line Card exceeds
>> total
>> >> >> >> power
>> >> >> >> allowe
>> >> >> >> d in slot 15
>> >> >> >>
>> >> >> >>
>> >> >> >> Please suggest if someone has faced this issue
>> >> >> >>
>> >> >> >> Thanks and Regards
>> >> >> >> J.Daniels
>> >> >> >>
>> >> >> >>
>> >> >> >> Blogs and organic groups at http://www.ccie.net
>> >> >> >>
>> >> >> >>
>> >> >> >>
>> _______________________________________________________________________
>> >> >> >> Subscription information may be found at:
>> >> >> >> http://www.groupstudy.com/list/CCIELab.html
>> >> >> >
>> >> >> >
>> >> >> > Blogs and organic groups at http://www.ccie.net
>> >> >> >
>> >> >> >
>> >> >> >
>> _______________________________________________________________________
>> >> >> > Subscription information may be found at:
>> >> >> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jul 20 2009 - 23:22:04 ART