Re: OT:SPA ERROR

Dang. Dude was right. You're gonna need that newer version. I just
realized we're on SY8 and doing it without the WAN 10gigE (just the
LAN).

12.0(33)S

And that crap should start working.

Thanks,

--William McCall
On Mon, Jul 20, 2009 at 12:31 PM, jack daniels<jckdaniels12_at_gmail.com> wrote:
> Router#sh gsr power-mgr
>
> Power management summary
> ------------------------
> Powershelf type: DC Power Supplies
> Operating phase: RUNNING_PHASE
> Feature state : Enabled
> Operating mode : REDUNDANT
>
> Total supply power: 4800 W
> Route processors: 60 W
> Linecards: 1440 W
> Chassis components: 946 W
> Total inuse power: 2446 W
> Remaining: 2354 W
>
> PEM1 present, supplying up to 2400 watts; uptime 0d00h05m
> PEM2 present, supplying up to 2400 watts; uptime 0d00h05m
> PEM3 present, supplying up to 2400 watts; uptime 0d00h05m
> PEM4 present, supplying up to 2400 watts; uptime 0d00h05m
>
>
>
>
>
>
> On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
>>
>> I mean to say that it should work in 32(SY6).
>>
>> sh gsr power-mgr would be awesome too. I forgot to ask for that.
>>
>> Thanks,
>>
>> --William McCall
>>
>> On Mon, Jul 20, 2009 at 12:27 PM, jack daniels<jckdaniels12_at_gmail.com>
>> wrote:
>> > Hi William,
>> >
>> > Is that the case 12.0(32)SY6 has no support for this SPA. But you mean
>> > any
>> > other IOS release of same train SY has it , can u please confirm the IOS
>> > train having this SPA support. Is IOS upgrade only wayout for this ?
>> >
>> >
>> > Thanks and Regards
>> > J.Daniels
>> >
>> > On 7/20/09, William McCall <william.mccall_at_gmail.com> wrote:
>> >>
>> >> It would look like you would need to upgrade, but the SY is a separate
>> >> branch from the S. I have confirmed that we use this SPA here with SY
>> >> code.
>> >>
>> >> 2009/7/20 Alex H. Ryu <r.hyunseog_at_ieee.org>:
>> >> > You may have to upgrade the IOS to support this card.
>> >> >
>> >> >
>> >> >
>> >> > http://www.cisco.com/en/US/docs/interfaces_modules/shared_port_adapters/configuration/12000Series/12sovsip.html
>> >> >
>> >> > SPA-1X10GE-WL-V2 requires 12.0(33)S at minimum, and you are running
>> >> > 12.0(32)SY6.
>> >> >
>> >> >
>> >> > Alex
>> >> >
>> >> >
>> >> >
>> >> >
>> >> > jack daniels wrote:
>> >> >> Hi group,
>> >> >>
>> >> >> I have a queery . I have a card SPA-1X10GE-WL-V2 and I'm instling
>> >> >> the
>> >> >> same
>> >> >> into SIP-601 of 12416 chassis. IOS version is
>> >> >> c12kprp-k4p-mz.120-32.SY6.
>> >> >>
>> >> >> But this SPA is not getting detected it gives error -
>> >> >>
>> >> >> Router#
>> >> >> SLOT 15:00:01:38: %EE192-5-LC_INVALID_SPACONFIG: Invalid SPA
>> >> >> configuration
>> >> >> for l
>> >> >> inecard in slot 1340:
>> >> >> Invalid spa type when getting the spa power.
>> >> >> SLOT 15:00:01:38: %EE192-5-LC_EXCEED_POWER: Line Card exceeds total
>> >> >> power
>> >> >> allowe
>> >> >> d in slot 15
>> >> >>
>> >> >>
>> >> >> Please suggest if someone has faced this issue
>> >> >>
>> >> >> Thanks and Regards
>> >> >> J.Daniels
>> >> >>
>> >> >>
>> >> >> Blogs and organic groups at http://www.ccie.net
>> >> >>
>> >> >>
>> >> >> _______________________________________________________________________
>> >> >> Subscription information may be found at:
>> >> >> http://www.groupstudy.com/list/CCIELab.html
>> >> >
>> >> >
>> >> > Blogs and organic groups at http://www.ccie.net
>> >> >
>> >> >
>> >> > _______________________________________________________________________
>> >> > Subscription information may be found at:
>> >> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jul 20 2009 - 12:34:31 ART