Victor,
Did you check to see what the OSPF network type is on the hub's
interface when using standard FR and then when using PPPoFR?
Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
bdennis_at_internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987 x 703
Outside US: 775-826-4344 x 703
----- Original Message -----
From: "Victor" <cisco.all.stuff_at_gmail.com>
Sent: Tue, July 14, 2009 19:39
Subject:OSPF Virtual Links and PPPoFR
Hello Guys,
I've been trying to get running OSPF Virtual Links over a 3 routers topology
1 hub + 2 spokes using PPPoFR for connecting between them, where one of the
spokes is the backbone and I have some Loopbacks created on each router on
different areas, so finally I only can get running the Virtual Link going
from spoke to spoke but NEVER the VL between the hub to the spoke (area 0).
I changed the PPPoFR config and used only FR and everything works OK, when I
try to use PPPoFR (no changes in OSPF config) I get the same problem.
I'm sure I'm missing something..... do you have any suggestion??
Regards.... Victor.
Blogs and organic groups at http://www.ccie.net
Received on Wed Jul 15 2009 - 01:22:01 ART
This archive was generated by hypermail 2.2.0 : Sat Aug 01 2009 - 13:10:22 ART