Re: OSPF Virtual Links and PPPoFR

From: Joe Astorino <jastorino_at_ipexpert.com>
Date: Wed, 15 Jul 2009 11:06:42 -0400

Agreed. Make sure you OSPF network types match in both situations. With
PPPoFR point-to-point is your best option.

On Wed, Jul 15, 2009 at 2:22 AM, Brian Dennis <
bdennis_at_internetworkexpert.com> wrote:

> Victor,
> Did you check to see what the OSPF network type is on the hub's
> interface when using standard FR and then when using PPPoFR?
>
> Brian Dennis, CCIEx5 #2210 (R&S/ISP-Dial/Security/SP/Voice)
> bdennis_at_internetworkexpert.com
>
> Internetwork Expert, Inc.
> http://www.InternetworkExpert.com
> Toll Free: 877-224-8987 x 703
> Outside US: 775-826-4344 x 703
>
> ----- Original Message -----
> From: "Victor" <cisco.all.stuff_at_gmail.com>
> Sent: Tue, July 14, 2009 19:39
> Subject:OSPF Virtual Links and PPPoFR
>
>
> Hello Guys,
> I've been trying to get running OSPF Virtual Links over a 3 routers
> topology
> 1 hub + 2 spokes using PPPoFR for connecting between them, where one of the
> spokes is the backbone and I have some Loopbacks created on each router on
> different areas, so finally I only can get running the Virtual Link going
> from spoke to spoke but NEVER the VL between the hub to the spoke (area 0).
> I changed the PPPoFR config and used only FR and everything works OK, when
> I
> try to use PPPoFR (no changes in OSPF config) I get the same problem.
>
> I'm sure I'm missing something..... do you have any suggestion??
>
> Regards.... Victor.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
>
> ----- End of original message -----
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Regards,
Joe Astorino - CCIE #24347 R&S
Technical Instructor - IPexpert, Inc.
Cell: +1.586.212.6107
Fax: +1.810.454.0130
Mailto:  jastorino_at_ipexpert.com
Blogs and organic groups at http://www.ccie.net
Received on Wed Jul 15 2009 - 11:06:42 ART

This archive was generated by hypermail 2.2.0 : Sat Aug 01 2009 - 13:10:22 ART