Square Topologies and Routing Protocol

From: James Howard <jamesh.howard37_at_gmail.com>
Date: Mon, 13 Jul 2009 14:02:51 -0700

I have 4 routers in Square topology running EIGRP. R1/R2 connected via GigE
and R3/R4 are also connected via GigE. R1 is connected via R3 using a serial
links and R2 is connected via R4 using the serial link. I am looking for
load balancing on both Serial links without employing dreaded OER.

r
James

Blogs and organic groups at http://www.ccie.net
Received on Mon Jul 13 2009 - 14:02:51 ART

This message: [ Message body ]
Next message: Ryan West: "RE: IEWB R/S Vol IV (troubleshooting)"
Previous message: Ryan West: "RE: VERY OT: POE over SFP module"
Next in thread: Ryan West: "RE: Square Topologies and Routing Protocol"
Maybe reply: Ryan West: "RE: Square Topologies and Routing Protocol"
Maybe reply: Larry Hadrava: "Re: Square Topologies and Routing Protocol"
Maybe reply: James Howard: "Re: Square Topologies and Routing Protocol"
Maybe reply: Larry Hadrava: "Re: Square Topologies and Routing Protocol"
Maybe reply: James Howard: "Re: Square Topologies and Routing Protocol"
Maybe reply: Ryan West: "RE: Square Topologies and Routing Protocol"
Maybe reply: Bryan Bartik: "Re: Square Topologies and Routing Protocol"

Contemporary messages sorted: [ by date ] [ by thread ] [ by subject ] [ by author ] [ by messages with attachments ]

This archive was generated by hypermail 2.2.0 : Sat Aug 01 2009 - 13:10:22 ART