RE: 回覆: Re: Problem for Upgrade CUE from 2.1.2

Hi Jack

I found the following error when enter to the cue

Localhost err_handler: CRASH appsServices startup startup.sh Sytem has
crashed. The trace buffer information is stored in the file
"atrace_save.log" You can upload the file using "copy log" command.

I want to use software install clean command to reinstall again. But it
restart after 3 - 4second. How can I upgrade the cue during booting up.

Thanks

Best Regards
David

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
davidytk
Sent: Monday, July 06, 2009 5:58 PM
To: 'jack daniels'
Cc: ccielab_at_groupstudy.com
Subject: RE: &^BP: Re: Problem for Upgrade CUE from 2.1.2 to 7.0.1

Hi Jack

Is it possible to restore-factory default when I cannot login to the
AIM-CUE.

Please advise.

Thakns

David

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of jack
daniels
Sent: Monday, July 06, 2009 2:46 PM
To: davidytk_at_netvigator.com
Cc: ccielab_at_groupstudy.com
Subject: Re: &^BP: Re: Problem for Upgrade CUE from 2.1.2 to 7.0.1

Hi,

I tried on 2621 with NME-CUE , it toook me around 5 min for bootup what I
recall.

Regards
J.Daniels

2009/7/6 davidytk_at_netvigator.com <davidytk_at_netvigator.com>

> Hi Jacky
>
> I have downloaded all file to the CF (1GB), it can install to the CUE.
> However when the CUE is bootup, it request me to restore the old
> configuration. When I click 'y', it shows a screen "booting .....3% ->
27%,
> and show the seconds for booting up" I have waited for a long time for
this
> stage and still waiting.
>
> I am using 2611xm with AIM-CUE, will it be a problem for slow booting.
>
> Is it faster for using 2801/2811 for booting AIM-CUE.
>
> Thanks
>
> Best REgards
> David
>
> -----l)l0T.'----
> 1H%s$H: jckdaniels12_at_gmail.com
> $i4A: 05/07/2009 22:49
> &,%s*L: "davidytk"<davidytk_at_netvigator.com>
> 0F%;: <ccielab_at_groupstudy.com>
> %D&.: Re: Problem for Upgrade CUE from 2.1.2 to 7.0.1
>
> Hi ,
>
> You are using NM-CUE or AIM or NME-CUE ......
>
> have you downloaded the coresponding files -
>
>
> For NM-CUE, NM-CUE-EC, and AIM-CUE (cue-vm-k9.nm-aim.7.0.x.tar)
>
> cue-installer.nm-aim.7.0.x
>
> cue-vm-k9.nm-aim.7.0.x.pkg
>
> cue-vm-full-k9.nm-aim.7.0.x.prt1
>
> cue-vm-installer-k9.nm-aim.7.0.x.prt1
>
> cue-vm-langpack.nm-aim.7.0.x.pkg
>
> For NME-CUE (cue-vm-k9.nme.7.0.x.tar)
>
> cue-installer.nme.7.0.x
>
> cue-vm-k9.nme.7.0.x.pkg
>
> cue-vm-full-k9.nme.7.0.x.prt1
>
> cue-vm-installer-k9.nme.7.0.x.prt1
>
> cue-vm-langpack.nme.7.0.x.pkg
>
>
>
> Regards
>
>
>
> On Sun, Jul 5, 2009 at 5:50 PM, davidytk <davidytk_at_netvigator.com> wrote:
>
> > Dear all
> >
> >
> >
> > I am now upgrade CUE for 2.1.2 to 7.0.1, however it failed. I following
> the
> > following link to upgrade.
> >
> >
> >
> >
> > <
> >
>
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_0/install/upgr
> > ade.html>
> >
> >
>
>
http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/rel7_0/install/upgra
> > de.html
> >
> >
> >
> > I am using "software download clean <
> > ftp://20.0.0.1/cue-vm-k9.plat.ver.pkg>
> > ftp://20.0.0.1/cue-vm-k9.plat.ver.pkg. The files are downloaded to the
> CUE
> > flash file.. However when I type "software install clean
> > cue-vm-k9.plat.ver.pkg" It said the package is only add-ons, which is
not
> > valid for clean-install.
> >
> >
> >
> > How can I upgrade from 2.1.2 to 7.0.1
> >
> >
> >
> > Thanks
> >
> >
> >
> > Best Regards
> >
> > David
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jul 06 2009 - 19:21:43 ART