RE: ipv6 eigrp - redist ospf v3 into it

Hey,

Don't worry, keep your head up man :) If you know EIGRP and you learn it
well, you know EIGRPv6. Seriously, it is basically the same thing except
for a few nuances, particularly the "no shut" command. Other than
that...you will be good to go.

Regards,

Joe Astorino
CCIE #24347 (R&S)
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
 

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of ALL
From_NJ
Sent: Monday, June 29, 2009 7:20 PM
To: Bryan Bartik
Cc: Cisco certification
Subject: Re: ipv6 eigrp - redist ospf v3 into it

Thanks for the response Bryan. I do not have the rack now ... it was using
the full ASET labs, number 2. I will not have access till Thursday when I
have another session. Sorry 'bout that Bryan and team. I did not copy my
configs off or get time to run auto-verify since I was called away.

BTW - I saw a thread on these ASET labs recently and ... these ASET labs are
kicking my butt mercilessly.

Today the setup was pretty basic - the ipv6 eigrp was over lan, and the OSPF
is being learned from the wan. About 5 routers all together. The ospf
routers learned the eigrp just fine, but eigrp could not learn the ospf.

If I get some time between tonight and tomorrow I will lab something up at
home. Was just wondering from anyone if there were some gotchas 'things to
remember' with this. I was missing something today ... and it did not
work.

Good news is ... I do not see eigrp v3 on the current blueprint, cool, but
... after october it is there ... yikes!

Appreciate your thoughts / feedback

On Mon, Jun 29, 2009 at 2:15 PM, Bryan Bartik <bbartik_at_ipexpert.com> wrote:

> Configs/Topology please! :)
>
> On Mon, Jun 29, 2009 at 11:01 AM, ALL From_NJ<all.from.nj_at_gmail.com>
> wrote:
> > Team,
> >
> > Having some problems ... any thoughts?
> >
> > I have done the redist and included a metric along with it. I can
redist
> > eigrp into ospf w/ no problems ... just going into eigrp seems to be the
> > issue. Yes ... I have issues ... ;-)
> >
> > --
> > Andrew Lee Lissitz
> > all.from.nj_at_gmail.com
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
> --
> Bryan Bartik
> CCIE #23707 (R&S), CCNP
> Sr. Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com
>

-- 
Andrew Lee Lissitz
all.from.nj_at_gmail.com
Blogs and organic groups at http://www.ccie.net