Re: ipv6 eigrp - redist ospf v3 into it

Thanks Al, no problem. I was doing some IPv6 labs over the weekend and
ran into some strange redistribution issues, "connected" routes were
not being redistributed into EIGRPv6 even when I had the
"include-connected" option. I was kind of curious if it was a similar
issue.

Anyways, good luck!

On Mon, Jun 29, 2009 at 5:30 PM, Joe Astorino<jastorino_at_ipexpert.com> wrote:
> Hey,
>
> Don't worry, keep your head up man :) If you know EIGRP and you learn it
> well, you know EIGRPv6. Seriously, it is basically the same thing except
> for a few nuances, particularly the "no shut" command. Other than
> that...you will be good to go.
>
> Regards,
>
> Joe Astorino
> CCIE #24347 (R&S)
> Sr. Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of ALL
> From_NJ
> Sent: Monday, June 29, 2009 7:20 PM
> To: Bryan Bartik
> Cc: Cisco certification
> Subject: Re: ipv6 eigrp - redist ospf v3 into it
>
> Thanks for the response Bryan. I do not have the rack now ... it was using
> the full ASET labs, number 2. I will not have access till Thursday when I
> have another session. Sorry 'bout that Bryan and team. I did not copy my
> configs off or get time to run auto-verify since I was called away.
>
> BTW - I saw a thread on these ASET labs recently and ... these ASET labs are
> kicking my butt mercilessly.
>
> Today the setup was pretty basic - the ipv6 eigrp was over lan, and the OSPF
> is being learned from the wan. About 5 routers all together. The ospf
> routers learned the eigrp just fine, but eigrp could not learn the ospf.
>
> If I get some time between tonight and tomorrow I will lab something up at
> home. Was just wondering from anyone if there were some gotchas 'things to
> remember' with this. I was missing something today ... and it did not
> work.
>
> Good news is ... I do not see eigrp v3 on the current blueprint, cool, but
> ... after october it is there ... yikes!
>
> Appreciate your thoughts / feedback
>
>
>
> On Mon, Jun 29, 2009 at 2:15 PM, Bryan Bartik <bbartik_at_ipexpert.com> wrote:
>
>> Configs/Topology please! :)
>>
>> On Mon, Jun 29, 2009 at 11:01 AM, ALL From_NJ<all.from.nj_at_gmail.com>
>> wrote:
>> > Team,
>> >
>> > Having some problems ... any thoughts?
>> >
>> > I have done the redist and included a metric along with it. I can
> redist
>> > eigrp into ospf w/ no problems ... just going into eigrp seems to be the
>> > issue. Yes ... I have issues ... ;-)
>> >
>> > --
>> > Andrew Lee Lissitz
>> > all.from.nj_at_gmail.com
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>>
>>
>>
>> --
>> Bryan Bartik
>> CCIE #23707 (R&S), CCNP
>> Sr. Support Engineer - IPexpert, Inc.
>> URL: http://www.IPexpert.com
>>
>
>
>
> --
> Andrew Lee Lissitz
> all.from.nj_at_gmail.com
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.12.93/2206 - Release Date: 06/29/09
> 05:54:00
>
>

-- 
Bryan Bartik
CCIE #23707 (R&S), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
Blogs and organic groups at http://www.ccie.net