Re: Multicast Not working

Here is the BB1 config , mroute and rp mappings.

BB1 Config:

ip pim autorp listener
interface Serial0/0/0.101 point-to-point
 description PVC 101 to Rack1
 ip address 54.1.1.254 255.255.255.0
 ip authentication mode eigrp 10 md5
 ip authentication key-chain eigrp 10 EIGRP
 ip pim sparse-mode
 ipv6 address 2001:54:254:1::254/64
 ipv6 address FE80::254 link-local
 ipv6 rip RIPng enable
 ipv6 ospf 1 area 0
 frame-relay interface-dlci 101
end

BB1#sh ip pim rp mapping
PIM Group-to-RP Mappings

Group(s) 224.0.0.0/4
  RP 150.1.5.5 (?), v2v1
    Info source: 150.1.1.1 (?), elected via Auto-RP
         Uptime: 00:20:22, expires: 00:00:32
Group(s) 224.1.1.1/32
  RP 150.1.5.5 (?), v2v1
    Info source: 150.1.1.1 (?), elected via Auto-RP
         Uptime: 00:04:10, expires: 00:03:00
Group(s) 224.2.2.2/32
  RP 150.1.5.5 (?), v2v1
    Info source: 150.1.1.1 (?), elected via Auto-RP
         Uptime: 00:04:10, expires: 00:02:55
Group(s) 224.3.3.3/32
  RP 150.1.5.5 (?), v2v1
    Info source: 150.1.1.1 (?), elected via Auto-RP
         Uptime: 00:04:10, expires: 00:02:57

BB1#sh ip mroute
IP Multicast Routing Table
Flags: D - Dense, S - Sparse, B - Bidir Group, s - SSM Group, C - Connected,
       L - Local, P - Pruned, R - RP-bit set, F - Register flag,
       T - SPT-bit set, J - Join SPT, M - MSDP created entry,
       X - Proxy Join Timer Running, A - Candidate for MSDP Advertisement,
       U - URD, I - Received Source Specific Host Report,
       Z - Multicast Tunnel, z - MDT-data group sender,
       Y - Joined MDT-data group, y - Sending to MDT-data group
Outgoing interface flags: H - Hardware switched, A - Assert winner
 Timers: Uptime/Expires
 Interface state: Interface, Next-Hop or VCD, State/Mode

(*, 224.1.1.1), 00:04:19/00:01:49, RP 150.1.5.5, flags: SPF
  Incoming interface: Serial0/0/0.101, RPF nbr 54.1.1.6
  Outgoing interface list: Null

(*, 224.0.1.39), 00:21:50/stopped, RP 0.0.0.0, flags: D
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Serial0/0/0.101, Forward/Sparse, 00:21:50/00:00:00

(150.1.1.1, 224.0.1.39), 00:01:21/00:01:38, flags: PT
  Incoming interface: Serial0/0/0.101, RPF nbr 54.1.1.6
  Outgoing interface list: Null

(*, 224.0.1.40), 00:22:30/stopped, RP 0.0.0.0, flags: DCL
  Incoming interface: Null, RPF nbr 0.0.0.0
  Outgoing interface list:
    Serial0/0/0.101, Forward/Sparse, 00:22:30/00:00:00

(150.1.1.1, 224.0.1.40), 00:21:54/00:02:27, flags: PLTX
  Incoming interface: Serial0/0/0.101, RPF nbr 54.1.1.6
  Outgoing interface list: Null

(150.1.5.5, 224.0.1.40), 00:21:53/00:02:04, flags: PLTX
  Incoming interface: Serial0/0/0.101, RPF nbr 54.1.1.6
  Outgoing interface list: Null

BB1#

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 15 2009 - 23:00:03 ART