Re: Multicast Not working

What does "show ip pim rp mapping" look like on BB1? Is BB1 learning of the
RP's? Does a traceroute to R2's serial interface follow the same path as you
have below (rpf)? Do you have "ip pim autorp listener" on bb1?

Thx.
Chris

On Mon, Jun 15, 2009 at 10:28 AM, dip <diptanshu.singh_at_gmail.com> wrote:

> Hi all, i have the following topology its nothing but sub topology of IE
> WB.
>
>
> BB1-----Fr-----R6--------R1(Spoke)------FR----R5(Hub)----R2(Spoke)
>
> Eigrp is configured as a routing protocol and i am able to ping from BB1 to
> R2 . i had configured PIM Sparse mode with R5 and R1 as C-RP and Auto RP is
> being used for RP Election.i had configured on R2 Serial Interface to
> joing
> group 224.1.1.1 . Now i am able to ping from R6 to this group and i am
> seeing the reply form R2 but when i try this from BB1 it doesnt works.BB1
> has a serial Point-to-point interface configured. Any clue why its
> happening.
>
> Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Jun 15 2009 - 13:27:00 ART