Re: vlan information in VTP modes

Hi RB Kumar,

  Thanks for the reply.May I should explain it better,I am trying to
understand,what it means by saying vlan details are stored in running-config
when the switch is in VTP mode transparent.Is even this undestanding of mine
is right ?.If so,anything on the running-config alone will get disappear
after reload of the switch right ?

Thanks

Regards
Anantha Subramanian Natarajan

On Sat, Jun 13, 2009 at 3:17 PM, R.B. Kumar <seekumarin_at_gmail.com> wrote:

> Hi Anantha,
>
> There are 2 ways of creating VLAN
> 1. Using VLAN database Mode
> 2. Using config mode
>
> In 1st method it is stored in .dat file and not in running config.
>
> In Transparent mode it do not care about VTP information. It just fwd the
> VTP advertisement (VTP V2 only)
>
> Hope it helps you
>
> R.B.KUMAR
> +91 98409 67933
>
> On Sat, Jun 13, 2009 at 10:54 PM, Anantha Subramanian Natarajan <
> anantha.natarajan_at_gravitant.com> wrote:
>
>> Hi All,
>>
>> I have an understanding that when the switch is in vtp mode server/client
>> the vlan details are stored in NVRAM/VLAN.dat and when the switch is in
>> vtp
>> mode transparent the vlan details are in running-config.Is my
>> understanding
>> right ?.If so,then I am trying to understand about the switch in
>> transparent
>> mode.If the vlan details are in running-config,is that mean after reset of
>> the switch the vlan details get erased.I am thinking and could test that
>> was
>> not the case.So trying to understand,what is it mean vlan details
>> available
>> in running-config.Thanks for th help.
>>
>> Regards
>> Anantha Subramanian Natarajan
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Jun 13 2009 - 20:34:08 ART