RE: procedure for converting autonmous to lwapp using CLI

That's an interesting approach, but makes sense. Takes care of the discovery
process and upgrade at the same time. I have done them in past before I have
started the configuration process on the controller.

From: ALL From_NJ [mailto:all.from.nj_at_gmail.com]
Sent: Saturday, June 06, 2009 2:52 PM
To: Ryan West
Cc: L Pham; Ashwin Iyer; Wouter Prins; Cisco certification
Subject: Re: procedure for converting autonmous to lwapp using CLI

Some good comments below.

Just a thought but ... You may choose to configure a syslog, configure the
lwapp for debugs and a logging server.

If you want to run the upgrade tool and parse out the commands / activity,
this will give you an idea of what is happening throughout.

I think the process though is pretty basic ... I googled this:
Login to the LAP console.

      debug lwapp console cli
      lwapp ap ip address 10.0.0.1 255.255.255.0
      lwapp ap ip default-gateway 10.0.0.3

      archive download-sw /f /o
tftp://10.0.0.3/<http://10.0.0.3/><imagename*>

HTH,

Andrew Lee Lissitz

On Sat, Jun 6, 2009 at 12:29 PM, Ryan West
<rwest_at_zyedge.com<mailto:rwest_at_zyedge.com>> wrote:
I hope it is. The LWAPP discovery process is pretty easy. Loc is right
tho, it's just a code upgrade, then the controller will load it's own
code to ap.

Sent from handheld.

On Jun 6, 2009, at 11:04 AM, "L Pham"
<ccie17030_at_gmail.com<mailto:ccie17030_at_gmail.com>> wrote:

> Ashwin,
> Use the upgrade tool save you additional time of import the cert to
> the LWAPP on some older device but other than that, just tftp a
> recovery image to the AP and reload, the LWAPP will find home or
> whatever method you choose.
>
> Hey, I hope this is not on ccie wireless lab ? ;-)))
>
> HTH,
> Loc
>
>
>
> On Sat, Jun 6, 2009 at 5:34 AM, Ashwin
Iyer<ash.iyer_at_gmail.com<mailto:ash.iyer_at_gmail.com>> wrote:
>> nothing trying to make u think outside the scope of CCIE
>>
>>
>>
>> On Sat, Jun 6, 2009 at 4:33 PM, Wouter Prins
<wp_at_null0.nl<mailto:wp_at_null0.nl>> wrote:
>>
>>> Can you explain what this has to do with the ccie lab?
>>>
>>> 2009/6/6 Ashwin Iyer <ash.iyer_at_gmail.com<mailto:ash.iyer_at_gmail.com>>
>>>
>>>> hi guys
>>>> does anyone have the cli procedure,i dont want the upgrade tool
>>>> procedure.
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________

>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>> --
>>> Wouter Prins
>>> wp_at_null0.nl<mailto:wp_at_null0.nl>
>>> 0x301FA912
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________

>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________

> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sat Jun 06 2009 - 14:54:30 ART