i tried all the procedures i am getting no where with this. See below:
can someone please help with this.
rommon 6 > xmodem -c c2691-adventerprisek9_ivs-mz.124-15.T6.bin
Do not start the sending program yet...
dir: cannot open device "flash:"
WARNING: All existing data in flash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
ERR: Not enough memory to download image
rommon 7 > xmodem -y c2691-adventerprisek9_ivs-mz.124-15.T6.bin
Do not start the sending program yet...
dir: cannot open device "flash:"
WARNING: All existing data in flash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
ERR: Not enough memory to download image
rommon 8 > xmodem -x c2691-adventerprisek9_ivs-mz.124-15.T6.bin
Do not start the sending program yet...
dir: cannot open device "flash:"
WARNING: All existing data in flash will be lost!
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
ERR: Not enough memory to download image
rommon 9 > xmodem -yr c2691-adventerprisek9_ivs-mz.124-15.T6.bin
Do not start the sending program yet...
Invoke this application only for disaster recovery.
Do you wish to continue? y/n [n]: y
Ready to receive file c2691-adventerprisek9_ivs-mz.124-15.T6.bin ...
CCCCCCCCCC
Timeout waiting for header - aborting download...
rommon 10 >
Thanks
Souley
--- On Sat, 6/6/09, ALL From_NJ <all.from.nj_at_gmail.com> wrote:
From: ALL From_NJ <all.from.nj_at_gmail.com>
Subject: Re: TFTPDNLD on 2691 router
To: "suley diaby" <sdiaby99_at_yahoo.com>
Cc: ccielab_at_groupstudy.com
Date: Saturday, June 6, 2009, 12:12 AM
Here is a tech tip on it.
http://www.cisco.com/en/US/docs/routers/access/2600/hardware/installation/gui
de/2600appB.html
From this link:
The tftpdnld command is not available on the Cisco 2691 router. The
recommended method for installing a Cisco IOS image on a Cisco 2691 router is
from a CompactFlash memory card loaded in the external CompactFlash memory
card slot.
In the past I have also used ymodem and set the console speed to 115. A bit
slower but worked ...
Good luck,
Andrew Lee Lissitz
On Fri, Jun 5, 2009 at 11:55 PM, suley diaby <sdiaby99_at_yahoo.com> wrote:
Hello Group Study,
i am trying to do a software recovery using tftpdnld on my 2691 router using
the procedure below:
rommon 1 > IP_ADDRESS=192.168.15.5
rommon 2 > IP_SUBNET_MASK=255.255.255.0
rommon 3 > DEFAULT_GATEWAY=192.168.15.4
rommon 4 > TFTP_SERVER=192.168.15.4
rommon 5 > TFTP_FILE=c2691-adventerprisek9_ivs-mz.124-15.T6.bin
rommon 6 > TFTP_CHECKSUM=0
rommon 7 > tftpdnld
monitor: command "tftpdnld" not found
Can someone help with this ?
Thanks
Souley
Blogs and organic groups at http://www.ccie.net
Received on Sat Jun 06 2009 - 04:05:28 ART
This archive was generated by hypermail 2.2.0 : Wed Jul 01 2009 - 20:02:36 ART