Re: TFTPDNLD on 2691 router

Here is a tech tip on it.

http://www.cisco.com/en/US/docs/routers/access/2600/hardware/installation/guide/2600appB.html

From this link:

The tftpdnld command is not available on the Cisco 2691 router. The
recommended method for installing a Cisco IOS image on a Cisco 2691 router
is from a CompactFlash memory card loaded in the external CompactFlash
memory card slot.

In the past I have also used ymodem and set the console speed to 115. A bit
slower but worked ...

Good luck,

Andrew Lee Lissitz

On Fri, Jun 5, 2009 at 11:55 PM, suley diaby <sdiaby99_at_yahoo.com> wrote:

> Hello Group Study,
> i am trying to do a software recovery using tftpdnld on my 2691 router
> using
> the procedure below:
>
> rommon 1 > IP_ADDRESS=192.168.15.5
> rommon 2 > IP_SUBNET_MASK=255.255.255.0
> rommon 3 > DEFAULT_GATEWAY=192.168.15.4
> rommon 4 > TFTP_SERVER=192.168.15.4
> rommon 5 > TFTP_FILE=c2691-adventerprisek9_ivs-mz.124-15.T6.bin
> rommon 6 > TFTP_CHECKSUM=0
> rommon 7 > tftpdnld
> monitor: command "tftpdnld" not found
>
> Can someone help with this ?
>
> Thanks
>
> Souley
>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Andrew Lee Lissitz
all.from.nj_at_gmail.com
Blogs and organic groups at http://www.ccie.net