Re: Eigrp summary-route

Hi Nayyar,

   Thanks

Regards
Anantha Subramanian Natarajan

On Tue, May 26, 2009 at 3:21 PM, nAyYAR <nyrhh_at_hotmail.co.uk> wrote:

> Hi,
>
> The Summaries are generated based on the information in the topology table.
>
> Regards
>
> --------------------------------------------------
> From: "Anantha Subramanian Natarajan" <anantha.natarajan_at_gravitant.com>
> Sent: Tuesday, May 26, 2009 9:03 PM
> To: "Cisco certification" <ccielab_at_groupstudy.com>
> Subject: Eigrp summary-route
>
> Hi All,
>>
>> I have the below topology
>>
>> R1 (Fa0/1) --------------(Fa0/1)R3
>>
>> R3 loopback0:130.0.3.3/24
>>
>> In R3 Fa0/1 enabled the below command(ip summary-address eigrp <AS>
>> 130.0.0.0 255.0.0.0) and tried to find whether it originated the summary
>> route to R1 with null0 route for itself,but it didn't.Then redistributed
>> the
>> loopback 0 into eigrp and found the summary route generated with null0,so
>> my
>> question is,inorder for eigrp to generate summary-route,does it not
>> sufficient to have the route in the routing table and does the associated
>> subnets to be rdistributed into eigrp or be advertised by network command
>> for the summary-route to be working.
>>
>> Kindly help me to clarify on the same.
>>
>> Thanks
>>
>> Regards
>> Anantha Subramanian Natarajan
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue May 26 2009 - 15:24:11 ART